[arm-allstar] New Pi v4 won't boot HamVoIP image

[David McGough]

Mike,

See this message for a solution:

http://lists.hamvoip.org/pipermail/arm-allstar/2020-November/015982.html

73, David KB4FXC



On Tue, 12 Jan 2021, "Mike Rhodes via ARM-allstar" wrote:

> Several months ago there was a post here about a new Pi v4 that would not
> boot off of the HamVoIP image. There were several replies from others with
> new Pi 4's no issues. Now I have the same problem.
>  
> The screen shows a Sep 3, 2020 bootloader and eventually fails after 3
> retries with "start4.elf is not compatible. This board requires newer
> software."
>  
> It's a v4 2GB, Pi new in the box from MicroCenter with a 16GB SD card. It
> boots fine on Raspian. 
>  
> I've had a 3B+ running HamVoip for months as a test setup and bought a new
> v4 board to build a repeater controller for a repeater.  
>  
> Any help is appreciated. 
>  
> Mike
> KD4LQS
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>