[arm-allstar] Hamlib / GPIOs for Channel Steering

[David Bufkin]

For those that do have a hf or vhf/uhf radio controlled by hamlib on your node. I would like to see a video of it operating.
Here’s your time to show off!
David “Tyler” Bufkin WZ5TX
817-846-4693

> On Mar 11, 2024, at 7:23 PM, David McGough via ARM-allstar <arm-allstar at hamvoip.org> wrote:
> 
> 
> Here is info on Motorola Channel Steering:
> 
> https://www.repeater-builder.com/motorola/maxtrac/remote-channel-select.html
> 
> 73, David K4FXC
> 
> 
>> On Mon, 11 Mar 2024, kd6gdb--- via ARM-allstar wrote:
>> 
>> I would love to see code on the showing of "last channel selected" on
> supermon and remote programming sounds interesting as well.
> 
> I am still dumbfounded as to what I am doing wrong with my BCD
> configuration for 16 channel GM300's my channel 16 selection BCD 1111
> selects channel 15 (not 16) on each of the radios.
> 
> On Mon, Mar 11, 2024 at 6:26 PM Dave Petrie via ARM-allstar <
> arm-allstar at hamvoip.org> wrote:
> 
>> i use two cdm1250's vhf uhf 20 watt transmit
>> 15 channels each
>> only one radio on at a time
>> voice announcement
>> remote programming
>> supermon shows the channel last selected
>> i am putting one together that supports allstar hamvoip repeater on one
>> usb sound card interface
>> and a private node for the dual band remote base on another
>> and usb to serial for rib programming if i can get the right adapter
>> Prolific 2303
>> or i can use a comtrol ip to serial 4 port box
>> a lot of work
>> there might be a simpler solution
>> be glad ti teamviewer demo
>> Dave wa2kjc
>> 
>> 
>> 
>> 
>> Sent from my iPhone
>> 
>>> On Mar 11, 2024, at 5:53 PM, Josh Hatton via ARM-allstar <
>> arm-allstar at hamvoip.org> wrote:
>>> 
>>> Good Day to All,
>>> 
>>> A few questions:
>>> 
>>> 1) What dual-band radio has the most success working with Hamlib for
>> remote
>>> base feature, as a "second node" on a HamVoIP image? Any lessons learned?
>>> 
>>> 2) Has anyone successfully used Pi GPIOs to perform channel steering of
>>> Motorola GM300s? If so, are you able to explain how you got success in
>> it?
>>> 
>>> 3) Does Supermon have the ability to control Hamlib<>RS232 to
>> serial<>radio
>>> through the webpage?
>>> 
>>> Thanks to all for your advice.
>>> 
>>> Josh W4ZZK
>>> _______________________________________________
>>> 
>>> ARM-allstar mailing list
>>> ARM-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>> 
>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>> _______________________________________________
>> 
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>> 
> 
> 
> --
> Pursuant to U.S. Code, title 47, Chapter 5, Sub chapter II, ß227,
> "Any and all non solicited commercial E-mail sent to this address is
> subject to a download and archival fee of $500.00 U.S.". E-mailing denotes
> acceptance of these terms.
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org