[arm-allstar] Hamvoip GPIO support Pi 400

[David McGough]

"Raspberry Pi 400 has the same 40-pin GPIO header as all current Raspberry 
Pi models. Only now it's positioned on the rear of the case. "

https://magpi.raspberrypi.com/articles/raspberry-pi-400-specifications-benchmarks-and-personal-computer-kit




On Tue, 5 Mar 2024, K0LNY ?? via ARM-allstar wrote:

> Are the GPIO pin assignments different on the 400s?
> 
> ----- Original Message ----- 
> From: "David McGough via ARM-allstar" <arm-allstar at hamvoip.org>
> To: "Steve Arntz" <km5ht.tx at gmail.com>
> Cc: "David McGough" <kb4fxc at inttek.net>; "Steve Arntz via ARM-allstar" 
> <arm-allstar at hamvoip.org>
> Sent: Tuesday, March 5, 2024 12:26 AM
> Subject: Re: [arm-allstar] Hamvoip GPIO support Pi 400
> 
> 
> 
> Hi Steve,
> 
> I've updated the WiringPi software. I believe it should now support the
> RPi 400.  Update with admin menu option #1.
> 
> 73, David K4FXC
> 
> 
> 
> On Thu, 29 Feb 2024, Steve Arntz wrote:
> 
> > Thank you very much.  I appreciate all that you do.
> >
> > 73 Steve, KM5HT
> >
> > On Thu, Feb 29, 2024 at 9:34â?¯AM David McGough <kb4fxc at inttek.net> wrote:
> >
> > >
> > > Hi Steve,
> > >
> > > Hummm...I'll update this package.
> > >
> > > 73, David K4FXC
> > >
> > >
> > > On Thu, 29 Feb 2024, Steve Arntz via ARM-allstar wrote:
> > >
> > > > I am trying to use the GPIO pins on a raspberry Pi 400 under Hamvoip
> > > 1.7-06
> > > > I get the error msg " Oops - unable to determine board type... model: 
> > > > 19"
> > > >
> > > > Is there a later hamvoip-gpio-support package I can install to support
> > > the
> > > > Pi 400?
> > > >
> > > > It looks like I may need gpio 2.61, but am not sure how to install 
> > > > that.
> > > >
> > > > Thanks in advance
> > > > 73 Steve, KM5HT
> > > >
> > > > RPi2-3-4 Version 1.7-06 Allstar - November 29, 2023 - K4FXC
> > > > Last login: Thu Feb 29 08:33:10 2024 from 10.18.103.252
> > > >
> > > > [repeater]$ gpio -v
> > > > gpio version: 2.60
> > > > Copyright (c) 2012-2018 Gordon Henderson
> > > > This is free software with ABSOLUTELY NO WARRANTY.
> > > > For details type: gpio -warranty
> > > > Raspberry Pi Details:
> > > >   Type: Unknown19, Revision: 00, Memory: 4096MB, Maker: Sony
> > > >   * Device tree is enabled.
> > > >   *--> Raspberry Pi 400 Rev 1.0
> > > >   * This Raspberry Pi supports user-level GPIO access.
> > > >
> > > > [repeater]$ gpio readall
> > > > Oops - unable to determine board type... model: 19
> > > >
> > > > [repeater]$ pacman -Ss hamvoip-gpio-support
> > > > hamvoip-RPi4B14/hamvoip-gpio-support 0.4-8 [installed]
> > > >     Tools and firmware for Arduino NANO boards, custom wiringpi, etc., 
> > > > to
> > > >     provide AllStar GPIO
> > > > hamvoip/hamvoip-gpio-support 0.3-1 [installed: 0.4-8]
> > > >     Tools and firmware for Arduino NANO boards, custom wiringpi, etc., 
> > > > to
> > > >     provide AllStar GPIO
> > > > _______________________________________________
> > > >
> > > > ARM-allstar mailing list
> > > > ARM-allstar at hamvoip.org
> > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >
> > > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > > >
> > >
> > >
> >
> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org 
> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>