[arm-allstar] Hamvoip GPIO support Pi 400

[K0LNY ??]

Are the GPIO pin assignments different on the 400s?

----- Original Message ----- 
From: "David McGough via ARM-allstar" <arm-allstar at hamvoip.org>
To: "Steve Arntz" <km5ht.tx at gmail.com>
Cc: "David McGough" <kb4fxc at inttek.net>; "Steve Arntz via ARM-allstar" 
<arm-allstar at hamvoip.org>
Sent: Tuesday, March 5, 2024 12:26 AM
Subject: Re: [arm-allstar] Hamvoip GPIO support Pi 400



Hi Steve,

I've updated the WiringPi software. I believe it should now support the
RPi 400.  Update with admin menu option #1.

73, David K4FXC



On Thu, 29 Feb 2024, Steve Arntz wrote:

> Thank you very much.  I appreciate all that you do.
>
> 73 Steve, KM5HT
>
> On Thu, Feb 29, 2024 at 9:34â?¯AM David McGough <kb4fxc at inttek.net> wrote:
>
> >
> > Hi Steve,
> >
> > Hummm...I'll update this package.
> >
> > 73, David K4FXC
> >
> >
> > On Thu, 29 Feb 2024, Steve Arntz via ARM-allstar wrote:
> >
> > > I am trying to use the GPIO pins on a raspberry Pi 400 under Hamvoip
> > 1.7-06
> > > I get the error msg " Oops - unable to determine board type... model: 
> > > 19"
> > >
> > > Is there a later hamvoip-gpio-support package I can install to support
> > the
> > > Pi 400?
> > >
> > > It looks like I may need gpio 2.61, but am not sure how to install 
> > > that.
> > >
> > > Thanks in advance
> > > 73 Steve, KM5HT
> > >
> > > RPi2-3-4 Version 1.7-06 Allstar - November 29, 2023 - K4FXC
> > > Last login: Thu Feb 29 08:33:10 2024 from 10.18.103.252
> > >
> > > [repeater]$ gpio -v
> > > gpio version: 2.60
> > > Copyright (c) 2012-2018 Gordon Henderson
> > > This is free software with ABSOLUTELY NO WARRANTY.
> > > For details type: gpio -warranty
> > > Raspberry Pi Details:
> > >   Type: Unknown19, Revision: 00, Memory: 4096MB, Maker: Sony
> > >   * Device tree is enabled.
> > >   *--> Raspberry Pi 400 Rev 1.0
> > >   * This Raspberry Pi supports user-level GPIO access.
> > >
> > > [repeater]$ gpio readall
> > > Oops - unable to determine board type... model: 19
> > >
> > > [repeater]$ pacman -Ss hamvoip-gpio-support
> > > hamvoip-RPi4B14/hamvoip-gpio-support 0.4-8 [installed]
> > >     Tools and firmware for Arduino NANO boards, custom wiringpi, etc., 
> > > to
> > >     provide AllStar GPIO
> > > hamvoip/hamvoip-gpio-support 0.3-1 [installed: 0.4-8]
> > >     Tools and firmware for Arduino NANO boards, custom wiringpi, etc., 
> > > to
> > >     provide AllStar GPIO
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > >
> >
> >
>

_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org