[arm-allstar] HamVoip on Pi3a

[David McGough]

Tony,

I have many RPi3A+ boards running HamVoIP, no issues.  However, I did hear 
one report of a person with issues. They said the problem was with a 
recently purchased RPi3A+ and a hardware rev change.....So, I purchased a 
couple new 3A+ boards and couple not duplicate the issue??

I guess I'll throw the question out to the group then:  Anyone else having 
problems with 3A+ boards, running the most recent HamVoIP firmware 
download?    If there is an issue, I'll look at resolving it ASAP!

73, David K4FXC


On Fri, 2 Feb 2024, Tony Loera via ARM-allstar wrote:

>  Are you sure that HamVoip is even running on the Pi3A+?
I recently made a post about a similar issue, and even after following everyone's advice, I never managed to get HamVoip to boot on a Pi3A+.  I bought a second board from a different supplier thinking I had a defective board but ran into the exact same issue (no boot/blinking lights).  I'm beginning to wonder if HamVoip ever actually ran on the Pi3A+ because I've yet to hear from someone who is currently using a Pi3A+ with HamVoip.
    On Thursday, February 1, 2024 at 08:26:32 PM PST, Dustin Perdue via ARM-allstar <arm-allstar at hamvoip.org> wrote:  
 
 HamVoIP has supported the 3A Plus for a long time. I have transferred cards between the 3A, Zero 2 and 4 multiple times without issue, or the need to reconfigure anything. Do you know for sure the Wi-Fi on that board actually works? Have you tried it with stock raspberry Pi OS?
Sent from my zippo


> On Feb 1, 2024, at 22:44, WB4IZC via ARM-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Good Day Everone,
> 
> I have built a stable HamVOIP image and have had it running using a wifi connection via a Pi3B+ board for a week now.  Upon moving the image to a Pi3a+, the image is not able to establish a wifi connection with the same wifi network as was used on the Pi3B+.  I next moved the image to a PiZero2W and the image establishes a connection upon boot. I am able to SSH into the image on both the Pi3B+ and the PiZero2w boards using established wifi connections.
> 
> To confirm that this is a Pi3a+ issue, I booted the same board with a Pi-Star image that had been using a wifi connection on a PiZeroWH and the Pi-Star image also failed to establish a connection via the Pi3a+ board.
> 
> Any possible fixes that would allow me to use the Pi3a+ with this image would be welcomed.  73, Steve WB4IZC  node 552251
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
  
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org