[arm-allstar] HamVoip Not Booting on RPi 3A+

[Dave Petrie]

tony try a different computer and fresh image download and image software 
i have seen this issue just before i had a bad hard drive in the computer i was using

Sent from my iPhone

> On Nov 21, 2023, at 5:06 PM, Tony Loera via ARM-allstar <arm-allstar at hamvoip.org> wrote:
> 
>  Just gave it shot, no luck.  I also tried Dave's image (WA2KJC) with no luck (both written with Win32 Imager).  Both give me the same light pattern almost immediately (insufficient power), regardless of power supply.
> I keep wanting to think the board is defective, but it runs the Raspberry OS just fine. 
>    On Tuesday, November 21, 2023 at 01:09:06 PM PST, David McGough <kb4fxc at inttek.net> wrote:  
> 
> 
> Tony,
> 
> Yes, use the Win32 Disk Imager software included with the download HamVoIP
> firmware.  The Rasbian imager probably won't work correctly.
> 
> 73, David K4FXC
> 
> 
>> On Tue, 21 Nov 2023, Tony Loera wrote:
>> 
>>   Hi David,
>> I downloaded the same img.xz file from this link and used RPi Imager to flash it to the SD Card.  Should I be using Win32 instead? 
>> -Tony 
>>     On Tuesday, November 21, 2023 at 05:42:22 AM PST, David McGough <kb4fxc at inttek.net> wrote: 
>>  
>>  
>> Tony,
>> 
>> Which HamVoIP image did you download and how did you flash it to the SD
>> card?  These images should work with the RPi3A+ boards:
>> 
>> https://hamvoip.org/RPi2/RPi-Z2W-2-3-4_V1.7-01_Allstar.exe
>> https://hamvoip.org/RPi2/RPi-Z2W-2-3-4_V1.7-01_Allstar.img.xz
>> 
>> Note that both of these files are compressed, so you must uncompress
>> first.
>> 
>> 73, David K4FXC
>> 
>> 
>> 
>>> On Tue, 21 Nov 2023, Tony Loera via ARM-allstar wrote:
>>> 
>>> I just picked up a new RPi 3A+ and loaded a fresh image of the latest HamVoip onto a 32GB MicroSD card and the thing wont boot.  I tried different cards as well as working cards and 3 different power supplies but all I get is 4-steady, and 7 fast blinking green lights.
>> Funny thing is that the Raspberry OS Runs just fine, but HamVoip just won't boot.  Board revision is 1.1.
>> I am out of ideas  
>> _______________________________________________
>> 
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>> 
>>  
> 
> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org