[arm-allstar] image issues ?

[David McGough]

Dan,

The very early RPi boards are not supported---they don't have enough CPU 
horsepower (and I've spent many hours trying to make them work!).

The HamVoIP supported RPi versions are:

Zero2W, 2B, 3B, 3B+, 3A+, CM3, CM4, Pi400 and 4B (rev 1.0 thru 1.5).

73, David K4FXC


On Wed, 22 Mar 2023, Dan Keizer via ARM-allstar wrote:

> repurposing a Raspberry Pi Model B  V1.1 for hamoip.
> 
> i've done quite a number of configs before.  have not had this issue before.
> trying to image a new 1.7 distro.  downloaded and verified sha1 no problem.
> RPi-Z2W-2-3-4_V1.7-01_Allstar.img.xz
> <https://hamvoip.org/RPi2/RPi-Z2W-2-3-4_V1.7-01_Allstar.img.xz>
> tried different power supplies and different sd cards just to be sure.
> i can boot a debian/raspberry pi image no problem .
> 
> the issue is the activity light on the pi just flashes 7 times then pauses
> then repeats
> the pi info for 7 flashes says:
> 
> - "7 flashes: kernel.img not found"
> 
> anyone else experiencing this ?  I dont have prior install images to use,
> so would even consider a prior image if available.
> 
> 73, Dan ve4drk
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>