[arm-allstar] image issues ?

[Dan Keizer]

Roger that - thanks for confirming.

73, Dan ve4drk

On Wed, Mar 22, 2023 at 4:16 PM David McGough <kb4fxc at inttek.net> wrote:

>
> Dan,
>
> The very early RPi boards are not supported---they don't have enough CPU
> horsepower (and I've spent many hours trying to make them work!).
>
> The HamVoIP supported RPi versions are:
>
> Zero2W, 2B, 3B, 3B+, 3A+, CM3, CM4, Pi400 and 4B (rev 1.0 thru 1.5).
>
> 73, David K4FXC
>
>
> On Wed, 22 Mar 2023, Dan Keizer via ARM-allstar wrote:
>
> > repurposing a Raspberry Pi Model B  V1.1 for hamoip.
> >
> > i've done quite a number of configs before.  have not had this issue
> before.
> > trying to image a new 1.7 distro.  downloaded and verified sha1 no
> problem.
> > RPi-Z2W-2-3-4_V1.7-01_Allstar.img.xz
> > <https://hamvoip.org/RPi2/RPi-Z2W-2-3-4_V1.7-01_Allstar.img.xz>
> > tried different power supplies and different sd cards just to be sure.
> > i can boot a debian/raspberry pi image no problem .
> >
> > the issue is the activity light on the pi just flashes 7 times then
> pauses
> > then repeats
> > the pi info for 7 flashes says:
> >
> > - "7 flashes: kernel.img not found"
> >
> > anyone else experiencing this ?  I dont have prior install images to use,
> > so would even consider a prior image if available.
> >
> > 73, Dan ve4drk
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
>
>