[arm-allstar] Courtesy tones

[LaRoy McCann]

Adam,
Thank you !!
That was it.  remotetx is the one for the local tone.

73's
LaRoy

On Wed, Mar 1, 2023 at 8:33 PM Adam MacLeod via ARM-allstar <
arm-allstar at hamvoip.org> wrote:

> Hello,
> In rpt.conf, Locate one of the ctX= lines where X is one of the
> numbers of the courtesy tone that you wish to use.
> Copy everything to the right of the equals sign to the end of this
> line to your clipboard.
>
> Then, locate the line that begins with remotetx=
> At the beginning of this line, add a ; (semicolon).
> After this line, add a new line with the return key, and type in
> remotetx= and then paste the contents of your clipboard. Be sure not
> to leave a space after remotetx=.
> Save, exit, upload rpt.conf (if necessary), then do astres.sh from the
> shell or select restart asterisk from the hamvoip menu.
> Finally, give it a whirl. This should set your local courtesy tone
> when connected to the one you selected from the ct selections.
>
> HTH,
> Adam VA3AUM
>
>
> On 3/1/23, LaRoy McCann via ARM-allstar <arm-allstar at hamvoip.org> wrote:
> > Hey Mike,
> > Thanks for the reply.
> > This reads it is the tone when you are not connected to another node.  My
> > issue is I am connected full time to another node.
> >
> > ;unlinkedct=ct2
> > ; Sent when not connected to another node
> >
> > By default linkunkeyct is the tone for the network connection.
> >
> > ;linkunkeyct=ct8
> >  ; sent when a network user unkeys.
> >
> > I have changed the linkunkeyct to ct3 and the network connection tone
> > changed.  The problem is the local user unkey tone is still using ct8.  I
> > have 2 different tones now but I want to change the local user unkey tone
> > to something else.  I don't see any definition for a local user unkey
> when
> > connected to another node.
> >
> > Does this make sense?
> > What defines the local user unkey tone when linked to another node?
> >
> > On Wed, Mar 1, 2023 at 7:08 PM Michael Webb via ARM-allstar <
> > arm-allstar at hamvoip.org> wrote:
> >
> >> LaRoy,
> >>
> >> in rpt.conf look for:
> >>
> >> ; COURTESY TONE MAPPING
> >>
> >> ;unlinkedct=ct2
> >> ; Sent when not connected to another node
> >> ;remotect=ct3
> >> ; Sent when remote base connected
> >>
> >> ; The linkunkeyct command can be used to
> >> ; customize the courtesy tone based on
> >> ; a node number. This is useful to identify
> >> ; input from a specific node. See the
> >> ; howto at hamvoip.org for details.
> >>
> >> ;linkunkeyct=ct8
> >>                                 ; sent when a network user unkeys. This
> >>                                 ; method uses the mapped tone for all
> >> nodes.
> >>
> >> ;linkunkeyct=by_node_number,ct8
> >>                                 ; Use this method to send a distinct
> >> courtesy
> >>                                 ; tone based on node number. If node
> >> number
> >> is
> >>                                 ; not defined use the default tone shown
> >> here
> >>                                 ; as ct8. Comment the linkunkeyct=ct8
> >> above
> >>                                 ; when using this method. See the howto
> on
> >> this
> >>                                 ; at hamvoip.org for additional
> >> information.
> >>
> >> and also look for:
> >>
> >> [telemetryNODENUMBERXXXXXX]
> >>
> >> ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
> >> ct2=|t(660,880,150,2048)
> >> ct3=|t(440,0,150,4096)
> >> ct4=|t(550,0,150,2048)
> >> ct5=|t(660,0,150,2048)
> >> ct6=|t(880,0,150,2048)
> >> ct7=|t(660,440,150,2048)
> >> ct8=|t(700,1100,150,2048) ; 2048 amplitude
> >> remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000);
> >> remotemon=|t(1209,0,50,2048)
> >> cmdmode=|t(900,903,200,2048)
> >> functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
> >> patchup=rpt/callproceeding
> >> patchdown=rpt/callterminated
> >>
> >>
> >> This is what you need right? unlinkedct=ct2
> >>
> >> Mike
> >>
> >> On Wed, Mar 1, 2023 at 2:20 PM LaRoy McCann via ARM-allstar <
> >> arm-allstar at hamvoip.org> wrote:
> >>
> >> > I have a repeater that is linked full time to a hub.  The courtesy
> tone
> >> for
> >> > the linkunkeyct is ct8.  I changed the tone for the linkunkey to
> another
> >> > tone.  It changed for the network unkey but the local user unkey tone
> is
> >> > still ct8.  I can not find anywhere this is defined in rpt.conf.
> There
> >> is
> >> > only unlinkedct, remotect and linkunkeyct defined.  What needs to be
> >> > defined to change the local user unkey tone when the repeater is
> linked?
> >> >
> >> > LaRoy McCann / K5TW
> >> > _______________________________________________
> >> >
> >> > ARM-allstar mailing list
> >> > ARM-allstar at hamvoip.org
> >> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >> >
> >> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >> >
> >> _______________________________________________
> >>
> >> ARM-allstar mailing list
> >> ARM-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >>
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
>
>
> --
>
> Best Regards,
> Adam MacLeod
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>