[arm-allstar] DINAH V3 issue

[Mark Cohen]

Actually, I found the issue and resolved it. 

I forgot that the devices require a change to simpleusb.conf  (gpio4 = out,0) and 
in the rpt.conf

cop,62,GPIO4:1 = c|t|RPT_RXKEYED
cop,62,GPIO4:0 = c|f|RPT_RXKEYED

Once I remembered to do that, the LED started working properly.

73 de K6EF
> On Jul 5, 2023, at 6:51 PM, Mark Cohen via ARM-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Greetings, 
> 
> I've got a bunch of allstar nodes and built one of the DINAH devices way back when (v3) .. I just now decided to try it out and connect it to the Yaesu FT-8800.
> 
> All seems well and it detects COS/PTT, etc. I just don't seem to get the COS LED to turn on.. It's really not that big of a deal, because everything else seems to work, but it does slightly bug me. 
> 
> The solder joints/pads all look fine and the LED itself seems OK. The RED LED works just fine.
> 
> Is this a known software issue? Is there a trick to get it to work? 
> 
> Thanks, 
> 
> 73 de K6EF
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org