[arm-allstar] DINAH V3 issue

[Steve Smith]

In our DINAH and SHARI products, a change to rpt.conf and  
simpleusb.conf is required to make the COS LED work.  The required 
changes are described in this document:

https://groups.io/g/DINAH/files/COS LED.pdf

Steve - N8AR


------ Original Message ------
>From "Mark Cohen via ARM-allstar" <arm-allstar at hamvoip.org>
To "ARM-allstar" <arm-allstar at hamvoip.org>
Cc "Mark Cohen" <k6ef at k6ef.net>
Date 7/5/2023 9:51:25 PM
Subject [arm-allstar] DINAH V3 issue

>Greetings,
>
>I've got a bunch of allstar nodes and built one of the DINAH devices way back when (v3) .. I just now decided to try it out and connect it to the Yaesu FT-8800.
>
>All seems well and it detects COS/PTT, etc. I just don't seem to get the COS LED to turn on.. It's really not that big of a deal, because everything else seems to work, but it does slightly bug me.
>
>The solder joints/pads all look fine and the LED itself seems OK. The RED LED works just fine.
>
>Is this a known software issue? Is there a trick to get it to work?
>
>Thanks,
>
>73 de K6EF
>_______________________________________________
>
>ARM-allstar mailing list
>ARM-allstar at hamvoip.org
>http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>Visit the BBB and RPi2/3/4 web page - http://hamvoip.org