[arm-allstar] problem connecting to WiFi

[Douglas Goree]

I found that you have to connect wired internet and ssh into it (or
whatever you use). Then go to wifi setup and change all info (ip address,
pws, ect.). You should get a message to remove the wired connection after
starting reboot. Hope this is of some help.

On Fri, Jan 6, 2023 at 1:36 PM Doug Langley via ARM-allstar <
arm-allstar at hamvoip.org> wrote:

> Is there a script, or command, that can be run to view any WiFi output
> when establishing a WiFi connection?
> I just replaced an old asus router with a ubiquiti router and all 3 of
> my Pi 3b pluses won't connect anymore.
> I left the WiFi SSID and password the same to avoid this problem, but it
> didn't seem to help.
> I tried configuring the AP to
>   only use 2.4 or 5 g, and that didn't work.
> I connected the pi via ethernet and ran through the wifi setup under
> menu option 7.
> I'm all out of ideas, and I'm hoping there is some way to manually
> initiate the WiFi connection and hopefully  get some useful information
> to track down the problem.
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>