[arm-allstar] New install V1.7-01

[Dave Petrie]

are you sending the tones via RF or on suppermon

if only dtmf try supermon and if both fail then like Rich said check to
make sure
telemetry is enabled in rpt.conf
you can also log into putty menu 9 and do  asterisk -rvvv
and watch to see if all your dtmf tones are being decoded
i had to add this line in simpleusb.conf to get all my RF dtmf tones to work

dtmf_relax=1 ;when dtmf tones are not decoding this opens the door wider

On Sun, Dec 3, 2023 at 1:51 PM Rich Ball via ARM-allstar <
arm-allstar at hamvoip.org> wrote:

> Hi Dan.
>
> Do you have telemetry enabled? If not, you will not hear anything when you
> issue *70.  How about *81 for time?
>
> Regards,
>
> Rich
>
> -----Original Message-----
> From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of Dan
> Jernheden via ARM-allstar
> Sent: Sunday, December 3, 2023 12:54 PM
> To: arm-allstar at hamvoip.org
> Cc: Dan Jernheden <dan at jernheden.se>
> Subject: [arm-allstar] New install V1.7-01
>
> Hello everyone!
>
> I recently installed HamVoIP: RPi-Z2W-2-3-4_V1.7-01_Allstar on RaspberryPi
> 2B.
>
> I’ve gone through the configuration menu and PTT, COS and audio levels
> looks ok. The DTMF decoder seems to work also from CLI client output.
> But I got no response from Allstar when sending DTMF-commands...? If I do
> *70 nothing happens... I was expecting a system status report.
> What am I missing?
>
> This is the output from log:
> [root at AllStar ~]# cat /var/log/asterisk/messages [Dec  3 18:11:25]
> NOTICE[312] dnsmgr.c: Managed DNS entries will be refreshed every 300
> seconds.
> [Dec  3 18:11:25] NOTICE[312] cdr.c: CDR simple logging enabled.
> [Dec  3 18:11:25] NOTICE[312] loader.c: 117 modules will be loaded.
> [Dec  3 18:11:25] NOTICE[312] chan_irlp.c: Unable to load config irlp.conf
> [Dec  3 18:11:25] WARNING[312] cdr_odbc.c: cdr_odbc: Unable to load config
> for ODBC CDR's: cdr_odbc.conf [Dec  3 18:11:25] NOTICE[312]
> chan_usbradio.c: Unable to load config usbradio.conf [Dec  3 18:11:25]
> ERROR[312] chan_echolink.c: Unable to load config echolink.conf [Dec  3
> 18:11:26] NOTICE[312] pbx_ael.c: Starting AEL load process.
> [Dec  3 18:11:26] NOTICE[312] pbx_ael.c: AEL load process: calculated
> config file name '/usr/local/hamvoip-asterisk/etc/asterisk/extensions.ael'.
> [Dec  3 18:11:26] NOTICE[312] pbx_ael.c: File
> /usr/local/hamvoip-asterisk/etc/asterisk/extensions.ael not found; AEL
> declining load [Dec  3 18:11:26] ERROR[312] chan_voter.c: Unable to load
> config voter.conf [Dec  3 18:11:26] WARNING[312] pbx_spool.c: Unable to
> create queue directory /var/spool/asterisk/outgoing -- outgoing spool
> disabled [Dec  3 18:11:26] ERROR[312] codec_dahdi.c: Failed to open
> /dev/dahdi/transcode: No such file or directory [Dec  3 18:11:26]
> NOTICE[322] app_rpt.c: Normal Repeater Init 58973 [Dec  3 18:11:26]
> NOTICE[322] app_rpt.c: Normal Repeater Init 1999 [Dec  3 18:11:26]
> NOTICE[325] chan_iax2.c: Registered IAX2 to '162.248.92.131', who sees us
> as xx.xxx.xxx.xxx:4569 with no messages waiting
>
> [Dec  3 18:11:26] NOTICE[359] chan_simpleusb.c: Loaded parameters from
> simpleusb_tune_usb.conf for device usb .
> [Dec  3 18:16:42] WARNING[389] file.c: File /tmp/ip does not exist in any
> format [Dec  3 18:16:42] WARNING[389] file.c: Unable to open /tmp/ip (format
> 0x4 (ulaw)): No such file or directory
> [Dec  3 18:16:42] WARNING[389] app_rpt.c: ast_streamfile failed on
> DAHDI/pseudo-2009024883
>
> Do I need to fix some of this for normal AllStar simplex node operation?
>
> Dan/SM6TZL
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>