[arm-allstar] New install V1.7-01

[Rich Ball]

Hi Dan.

Do you have telemetry enabled? If not, you will not hear anything when you issue *70.  How about *81 for time?

Regards,

Rich

-----Original Message-----
From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of Dan Jernheden via ARM-allstar
Sent: Sunday, December 3, 2023 12:54 PM
To: arm-allstar at hamvoip.org
Cc: Dan Jernheden <dan at jernheden.se>
Subject: [arm-allstar] New install V1.7-01

Hello everyone!

I recently installed HamVoIP: RPi-Z2W-2-3-4_V1.7-01_Allstar on RaspberryPi 2B.

I’ve gone through the configuration menu and PTT, COS and audio levels looks ok. The DTMF decoder seems to work also from CLI client output.
But I got no response from Allstar when sending DTMF-commands...? If I do *70 nothing happens... I was expecting a system status report.
What am I missing?

This is the output from log:
[root at AllStar ~]# cat /var/log/asterisk/messages [Dec  3 18:11:25] NOTICE[312] dnsmgr.c: Managed DNS entries will be refreshed every 300 seconds.
[Dec  3 18:11:25] NOTICE[312] cdr.c: CDR simple logging enabled.
[Dec  3 18:11:25] NOTICE[312] loader.c: 117 modules will be loaded.
[Dec  3 18:11:25] NOTICE[312] chan_irlp.c: Unable to load config irlp.conf [Dec  3 18:11:25] WARNING[312] cdr_odbc.c: cdr_odbc: Unable to load config for ODBC CDR's: cdr_odbc.conf [Dec  3 18:11:25] NOTICE[312] chan_usbradio.c: Unable to load config usbradio.conf [Dec  3 18:11:25] ERROR[312] chan_echolink.c: Unable to load config echolink.conf [Dec  3 18:11:26] NOTICE[312] pbx_ael.c: Starting AEL load process.
[Dec  3 18:11:26] NOTICE[312] pbx_ael.c: AEL load process: calculated config file name '/usr/local/hamvoip-asterisk/etc/asterisk/extensions.ael'.
[Dec  3 18:11:26] NOTICE[312] pbx_ael.c: File /usr/local/hamvoip-asterisk/etc/asterisk/extensions.ael not found; AEL declining load [Dec  3 18:11:26] ERROR[312] chan_voter.c: Unable to load config voter.conf [Dec  3 18:11:26] WARNING[312] pbx_spool.c: Unable to create queue directory /var/spool/asterisk/outgoing -- outgoing spool disabled [Dec  3 18:11:26] ERROR[312] codec_dahdi.c: Failed to open
/dev/dahdi/transcode: No such file or directory [Dec  3 18:11:26] NOTICE[322] app_rpt.c: Normal Repeater Init 58973 [Dec  3 18:11:26] NOTICE[322] app_rpt.c: Normal Repeater Init 1999 [Dec  3 18:11:26] NOTICE[325] chan_iax2.c: Registered IAX2 to '162.248.92.131', who sees us as xx.xxx.xxx.xxx:4569 with no messages waiting

[Dec  3 18:11:26] NOTICE[359] chan_simpleusb.c: Loaded parameters from simpleusb_tune_usb.conf for device usb .
[Dec  3 18:16:42] WARNING[389] file.c: File /tmp/ip does not exist in any format [Dec  3 18:16:42] WARNING[389] file.c: Unable to open /tmp/ip (format
0x4 (ulaw)): No such file or directory
[Dec  3 18:16:42] WARNING[389] app_rpt.c: ast_streamfile failed on
DAHDI/pseudo-2009024883

Do I need to fix some of this for normal AllStar simplex node operation?

Dan/SM6TZL

_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org