[arm-allstar] rPi 400 USB ports not working

[Patrick Perdue]

Upon further inspection, it seems WiFi isn't working on this rPi400 with 
this image either. If I enable the interface, it hangs for about a 
minute, then shows no connection or IP address. I also can't scan for 
networks, so the interface appears to have never been enabled. I don't 
actually need it for this system, ,but my second thought was to use a Pi 
Zero 2 W instead, but WiFi was disabled on this SD card, and I don't 
have a USB Ethernet dongle thing.




On 5/24/2022 1:37 PM, Patrick Perdue wrote:
> Hi:
> One of my Raspberry Pi 3 B's died this morning, so just for now, I'm 
> trying to get things going using a rPi400 I've had sitting around for 
> a while.
>
> I transferred my MicroSD card with HamVoIP from the old Pi, and was 
> able to SSH into it. Everything seems to be fine... except the USB 
> ports don't seem to function.
>
> I have plugged in various devices with a lot of not much going on.
>
> With a known-good sound fob connected, lsusb just produces this:
>
> [root at radioless ~]# lsusb
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> [root at radioless ~]#
>
> I should be seeing a USB3.0 root hub if nothing else.
>
> Here is output from a Raspberry Pi 4 not running HamVoIP, which has a 
> USB 3.0 hub with an AMBE dongle attached.
>
> pi at craig8:~ $ lsusb
> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 001 Device 016: ID 0403:6015 Future Technology Devices 
> International, Ltd Bridge(I2C/SPI/UART/FIFO)
> Bus 001 Device 015: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
> Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> pi at craig8:~ $
>
>
> Just wondering if today's luck continues, and I happen to have a bad 
> board, or if anyone else has seen this with HamVoIP.
>
> Maybe I have an old kernel or something?
>
> Thanks and 73
>
> N2DYI
>