[arm-allstar] DTMF tones do not show up in CLI

[Rick Wilson]

Glenn:

Since you can login to it remotely, the networking is probably ok.  So, the first thing to check is if you are registered.  Go to http://stats.allstarlink.org/ <http://stats.allstarlink.org/> and search for your node by number, call or city.  Until it is there the remote nodes will not let you connect.  They have to get an update from the registration server with your IP address.  When you connect, the address you are coming from is checked to ensure they are the same.  If you can see the console on the remote node, it will tell you as well.  Of course, this all assumes you have your node # and password configured correctly in the pi.  On the allstar server, ensure your server IAX Port is set to 4569 as well.  This causes weird problems if changed.

Rick WD5ETD

> On Mar 31, 2022, at 1:36 PM, Glenn Maclean via ARM-allstar <arm-allstar at hamvoip.org> wrote:
> 
> RAMS*CLI> rpt fun 56166 *345308
>    -- Hungup 'DAHDI/pseudo-1134897164'
> [Mar 31 11:20:23] NOTICE[349]: chan_iax2.c:4139 __auto_congest: Auto-congesting call due to slow response
>    -- Hungup 'DAHDI/pseudo-765804216'
>    -- Hungup 'IAX2/98.208.42.89:4568-350'
>    -- Hungup 'DAHDI/pseudo-1128978793'
>    -- <DAHDI/pseudo-1640261131> Playing 'rpt/node' (language 'en')
>    -- <DAHDI/pseudo-1640261131> Playing 'digits/4' (language 'en')
>    -- <DAHDI/pseudo-1640261131> Playing 'digits/5' (language 'en')
>    -- <DAHDI/pseudo-1640261131> Playing 'digits/3' (language 'en')
>    -- <DAHDI/pseudo-1640261131> Playing 'digits/0' (language 'en')
>    -- <DAHDI/pseudo-1640261131> Playing 'digits/8' (language 'en')
>    -- <DAHDI/pseudo-1640261131> Playing 'rpt/connection_failed' (language 'en')
>    -- Hungup 'DAHDI/pseudo-1640261131'
> RAMS*CLI> 
> 
> 
> I finished installing my Node at our repeater site. It was working perfectly on the bench.  The Raspi is connected to a RLC Club Deluxe II repeater controller on port 3 with a URI and cable made for the RLC interface.  The port is set up correctly with PTT and COS working correctly.  With Asterisk CLI DTMF tones do not show up from the radio repeater receiver.  Simple USB Tune with the RX option selected shows all the DTMF tones and the modulation is set to 3.5 kHz with service monitor. When I try to connect to another node with asterisk CLI I get the above response.  I have also tried connecting to another node using Supermon and the connection fails. The RASPI is directly connected to an old Motorola Comcast modem via ethernet cable no router is involved.  I can remotely log into the RASPI from home.  I am able to ping google and get a nice response back.  Any ideas as to what may be wrong? Thanks in advance for any help.  I know enough to be dangerous about all of this!
> 
> Glenn WA7SPY
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org