[arm-allstar] DTMF tones do not show up in CLI

[Glenn Maclean]

RAMS*CLI> rpt fun 56166 *345308
    -- Hungup 'DAHDI/pseudo-1134897164'
[Mar 31 11:20:23] NOTICE[349]: chan_iax2.c:4139 __auto_congest: Auto-congesting call due to slow response
    -- Hungup 'DAHDI/pseudo-765804216'
    -- Hungup 'IAX2/98.208.42.89:4568-350'
    -- Hungup 'DAHDI/pseudo-1128978793'
    -- <DAHDI/pseudo-1640261131> Playing 'rpt/node' (language 'en')
    -- <DAHDI/pseudo-1640261131> Playing 'digits/4' (language 'en')
    -- <DAHDI/pseudo-1640261131> Playing 'digits/5' (language 'en')
    -- <DAHDI/pseudo-1640261131> Playing 'digits/3' (language 'en')
    -- <DAHDI/pseudo-1640261131> Playing 'digits/0' (language 'en')
    -- <DAHDI/pseudo-1640261131> Playing 'digits/8' (language 'en')
    -- <DAHDI/pseudo-1640261131> Playing 'rpt/connection_failed' (language 'en')
    -- Hungup 'DAHDI/pseudo-1640261131'
RAMS*CLI> 


I finished installing my Node at our repeater site. It was working perfectly on the bench.  The Raspi is connected to a RLC Club Deluxe II repeater controller on port 3 with a URI and cable made for the RLC interface.  The port is set up correctly with PTT and COS working correctly.  With Asterisk CLI DTMF tones do not show up from the radio repeater receiver.  Simple USB Tune with the RX option selected shows all the DTMF tones and the modulation is set to 3.5 kHz with service monitor. When I try to connect to another node with asterisk CLI I get the above response.  I have also tried connecting to another node using Supermon and the connection fails. The RASPI is directly connected to an old Motorola Comcast modem via ethernet cable no router is involved.  I can remotely log into the RASPI from home.  I am able to ping google and get a nice response back.  Any ideas as to what may be wrong? Thanks in advance for any help.  I know enough to be dangerous about all of this!

Glenn WA7SPY