[arm-allstar] Help with home built Allstar node

[Phil Hazelton]

Hi there
Thanks for reply. Yep, good point I will check that. 
Didn’t you do a  YouTube vid series about Allstar node?
Cheers!
Phil
G8PJH 

Sent from my iPad

> On 4 Mar 2022, at 17:21, jgnatow <jgnatow at gmail.com> wrote:
> 
> 
> Thinking you need to flip the ptt setting in simpleusb. 
> 
> 
> John "Jason" Gnatowsky
> KG4FJC
> 434-841-9290
> On Mar 4, 2022 at 9:37 AM, Phil Hazelton via ARM-allstar <arm-allstar at hamvoip.org> wrote:
> 
> 
> Hi All,
> I’m new to Allstar. I am building a new node, using a Pi 3, Hamvoip soft ware, Baofeng 888 and a modified CM 108 usb sound card. After much effort, it seems it is nearly working. All star sees my node, and the radios are talking to each other on power up. However, when I turn on my node, the 888 starts to Tx and stays Tx’ing until the 888 Tx default time out kicks in. When I PTT my external ht the node briefly goes into Rx, then again defaults to Tx for the default period.
> Any help/ideas would be appreciated.
> Thanks,
> Phil, G8PJH 
> Sent from my iPad
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>