[arm-allstar] Help with home built Allstar node

[jgnatow]

Thinking you need to flip the ptt setting in simpleusb.


John "Jason" Gnatowsky
KG4FJC
434-841-9290
On Mar 4, 2022 at 9:37 AM, Phil Hazelton via ARM-allstar <
arm-allstar at hamvoip.org> wrote:


Hi All,
I’m new to Allstar. I am building a new node, using a Pi 3, Hamvoip soft
ware, Baofeng 888 and a modified CM 108 usb sound card. After much effort,
it seems it is nearly working. All star sees my node, and the radios are
talking to each other on power up. However, when I turn on my node, the 888
starts to Tx and stays Tx’ing until the 888 Tx default time out kicks in.
When I PTT my external ht the node briefly goes into Rx, then again
defaults to Tx for the default period.
Any help/ideas would be appreciated.
Thanks,
Phil, G8PJH
Sent from my iPad
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org