[arm-allstar] RIM Maxtrac settings

[Rory Bowers]

Hi Bryan,
I have been servicing Maxtracs forever and I have never seen one that
programs from the Accy connector.  Every one of them has programmed from
the Mic connector in the front.  You will need the Maxtrac RSS and a level
shifter.  Both are getting "rare".
Rory, K5CKS

On Fri, Jan 14, 2022 at 3:37 PM "Bryan Johnson via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hello all,
>
> I am trying to setup a low band Maxtrac as a private (6 meter remote
> base) node. I am having difficulty finding the precise accessory
> connector (RSS settings for the rear connector) for the Maxtrac. I am
> currently using the Maxtrac with a Pyramid SVR200 vehicular repeater (as
> a short range crossband setup), and it uses the "Public Address" setting
> for the rear connector. I don't know if I can use that, or need to use
> the "General I/O" settings for the assy connector. I am unable to
> decipher from the RIM schematic exactly what settings I need for which
> pins on the rear connector. I am eventually wanting to channel steer the
> Maxtrac (only the first 4 channels) once I get the RIM interface setup
> working, so info from anyone that has successfully done that would be
> most appreciated.
>
> Thanks in advance,
>
> Bryan Johnson - K6RBJ
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>