[arm-allstar] RIM Maxtrac settings

[Phil Hebert]

Your maxtrac does have the advanced logic board with 16 pins correct ??



Sent from my Mobile TRS-80


> On Jan 14, 2022, at 16:37, Bryan Johnson via ARM-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Hello all,
> 
> I am trying to setup a low band Maxtrac as a private (6 meter remote base) node. I am having difficulty finding the precise accessory connector (RSS settings for the rear connector) for the Maxtrac. I am currently using the Maxtrac with a Pyramid SVR200 vehicular repeater (as a short range crossband setup), and it uses the "Public Address" setting for the rear connector. I don't know if I can use that, or need to use the "General I/O" settings for the assy connector. I am unable to decipher from the RIM schematic exactly what settings I need for which pins on the rear connector. I am eventually wanting to channel steer the Maxtrac (only the first 4 channels) once I get the RIM interface setup working, so info from anyone that has successfully done that would be most appreciated.
> 
> Thanks in advance,
> 
> Bryan Johnson - K6RBJ
> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org