[arm-allstar] RIM Maxtrac settings

[Louis Corradi]

Here's the pinout for you.

<https://aka.ms/AAb9ysg>
________________________________
From: ARM-allstar <arm-allstar-bounces at hamvoip.org> on behalf of "Bryan Johnson via ARM-allstar" <arm-allstar at hamvoip.org>
Sent: Friday, January 14, 2022 1:29:24 PM
To: arm-allstar at hamvoip.org <arm-allstar at hamvoip.org>
Cc: Bryan Johnson <mtncomm2112 at gmail.com>
Subject: [arm-allstar] RIM Maxtrac settings

Hello all,

I am trying to setup a low band Maxtrac as a private (6 meter remote
base) node. I am having difficulty finding the precise accessory
connector (RSS settings for the rear connector) for the Maxtrac. I am
currently using the Maxtrac with a Pyramid SVR200 vehicular repeater (as
a short range crossband setup), and it uses the "Public Address" setting
for the rear connector. I don't know if I can use that, or need to use
the "General I/O" settings for the assy connector. I am unable to
decipher from the RIM schematic exactly what settings I need for which
pins on the rear connector. I am eventually wanting to channel steer the
Maxtrac (only the first 4 channels) once I get the RIM interface setup
working, so info from anyone that has successfully done that would be
most appreciated.

Thanks in advance,

Bryan Johnson - K6RBJ

_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
-------------- next part --------------
A non-text attachment was scrubbed...
Name: motorola.jpeg
Type: image/jpeg
Size: 30149 bytes
Desc: motorola.jpeg
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20220114/d95b53ec/attachment.jpeg>