[arm-allstar] SMS messages

[William Lewis]

Well, we tried going into the rpt.conf file and setting:

telemenabled=0   and

telemdefault=0

After connecting via a voip phone, the node itself no longer makes any 
voice announcement as to the new connection, but the sms telemetry is 
still being sent to the voip phone and causes the voip phone to 
disconnect after about 30 seconds.

So, those settings appear to handle voice telemetry, but not sms 
telemetry.

If anyone else had any suggestions, I'm open.

---
William Lewis
wlewis at myhostingsource.com

**Confidentiality Notice: This e-mail, including any attachments, is for 
the sole use of the intended recipients and may contain confidential and 
privileged information.  Any unauthorized review,  use, disclosure or 
distribution is prohibited. If you are not the intended recipient please 
notify the sender by reply e-mail and destroy all copies of the original 
message**

On 2022-12-16 15:12, Patrick Perdue wrote:

> Well, technically, dahdi/psudo doesn't have much to do with it, just 
> that by default, there is no telemetry. You can achieve this by adding 
> the line
> 
> telemenabled=0
> 
> in your rpt.conf, regardless of what driver you are using. This is 
> different than just setting telemdefault=0.
> 
> If you want courtesy tones, IDs, or anything else like that, however, 
> you shouldn't do that. This is why I set up a second private node 
> specifically for phone use, so I could leave my telemetry in tact, but 
> still suppress messages going to SIP clients.
> 
> On 12/16/2022 5:58 PM, William Lewis wrote:
> 
> This is effecting about 75+ AllStar nodes on our system. Using dahdi is 
> not really an option, though.
> 
> ---
> William Lewis
> wlewis at myhostingsource.com
> 
> **Confidentiality Notice: This e-mail, including any attachments, is 
> for the sole use of the intended recipients and may contain 
> confidential and privileged information.  Any unauthorized review,  
> use, disclosure or distribution is prohibited. If you are not the 
> intended recipient please notify the sender by reply e-mail and destroy 
> all copies of the original message**
> 
> On 2022-12-16 14:46, Dustin Perdue wrote:
> I don't quite have the same problem, but something similar with a SIP 
> soft phone. What I do is use a connected private node with dahdi/sudo, 
> that way all telemetry to the phone client is completely suppressed. 
> Works great. Then just connect that private node to my public node on 
> the same host to actually send it places. I also have sendphonelinks 
> disabled on that node.
> 
> Sent from my zippo
> 
> On Dec 16, 2022, at 14:56, William Lewis via ARM-allstar 
> <arm-allstar at hamvoip.org> wrote:
> 
> If this is not the correct list to post to, could someone point me in 
> the correct direction.
> 
> Question: On the HamVoIP version of AllStar, it seems to transmit sms 
> messages. These sms messages cause Polycom phones to disconnect after 
> about just 30 seconds. Several models of Polycoms.
> 
> It seems as though there might be a way to not send routine sms 
> messages, but the node still sends an initial "connected" sms message 
> which then still causes the phone to disconnect.
> 
> Is there _any way at all_ to configure the node to stop all sms 
> broadcasts _including_ the initial "connected" sms?
> 
> Thank you in advance.
> --
> William Lewis/KG6BAJ
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org