[arm-allstar] Rasp Pi4 2GB wont boot with hamvoip 1.6-14

[Patrick Perdue]

Hi:

Short version is that, until the image is updated by David, two files 
need to be changed -- fixup4.dat and start4.elf. Copy these files from 
the latest Raspberry Pi OS boot image to the FAT partition of the 
HamVoIP MicroSD card.

This affects the latest revision of rPi4 boards.

I made an otherwise stock HamVoIP image with these two files replaced 
such that they could be deployed at a datacenter recently, which worked 
fine.
Direct (temporary) link to this image is here.
http://xlx.borris.me/files/hamvoip.img.xz
If you're on Windows, you'll need something that can decompress this 
archive, like 7zip.

On 4/7/2022 3:09 PM, "Joe Moskalski via ARM-allstar" wrote:
> A friend of mine who is not local to me is trying install the hamvoip
> 1.6-14 version (latest)
> onto their pi4 but it gives the error upon boot up "start4.elf: is not
> compatible this board
> requires newer software"
>  From the research that I have done so far this latest version of Hamvoip
> software solved that issue. Has any else experienced this?
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org