[arm-allstar] Virtual node addition question

[Lu Vencl]

Hi David thank you for the response. I’m set up for digest so I don’t see the responses right away. I figured it out later that day.  I had 2 node stanzas and the first one was empty. Not sure how it happened but it was my error I guess when I was duplicating the series.
Everything is up and running now. 
Thanks again. 
Lu
KA4EPS

> On Oct 11, 2021, at 7:39 AM, David McGough <kb4fxc at inttek.net> wrote:
> 
> 
> Hi,
> 
> You need to add an entry in the rpt.conf [nodes] stanza on the 27892 hub, 
> like:
> 
> [nodes]
> 27976 = radio at 192.168.0.1/27976,NONE
> 
> 
> If BOTH of these nodes are on the SAME asterisk instance (both on the same 
> hub), you need something like:
> 
> [nodes]
> 27892 = radio at 127.0.0.1/27892,NONE
> 27976 = radio at 127.0.0.1/27976,NONE
> 
> 73, David KB4FXC
> 
> 
> 73, David KB4FXC
> 
> 
>> On Fri, 8 Oct 2021, "Lu Vencl via ARM-allstar" wrote:
>> 
>> I’m trying to add a virtual node (used as a hub)  to a working  node. 
>> I think I pretty much got everything set up but I have one issue that I 
>> just don’t understand why it has become a problem. I’ve had this 
>> working before on an old acid platform but for some reason it’s 
>> Reporting the local Lan IP instead of the public IP. Is there something 
>> that needs to be done to resolve that on hamVoIP platform?
> 
> Example:
> 
>   -- Call accepted by 208.85.182.216 (format g726aal2)    -- Format for 
> call is g726aal2    -- Executing [27892 at radio-secure:1] 
> Rpt("IAX2/192.168.0.1:3344-1741", "27892") in new stack[Oct  8 11:57:36] 
> WARNING[3298]: app_rpt.c:21583 rpt_exec: Node 27976 IP 208.85.182.216 
> does not match link IP 192.168.0.1!!
> 
> If anyone had an example I can send along I would appreciate it.
> Lu
> KA4EPS
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>