[arm-allstar] Virtual node addition question

[David McGough]

Hi,

You need to add an entry in the rpt.conf [nodes] stanza on the 27892 hub, 
like:

[nodes]
27976 = radio at 192.168.0.1/27976,NONE


If BOTH of these nodes are on the SAME asterisk instance (both on the same 
hub), you need something like:

[nodes]
27892 = radio at 127.0.0.1/27892,NONE
27976 = radio at 127.0.0.1/27976,NONE

73, David KB4FXC


73, David KB4FXC


On Fri, 8 Oct 2021, "Lu Vencl via ARM-allstar" wrote:

> I’m trying to add a virtual node (used as a hub)  to a working  node. 
> I think I pretty much got everything set up but I have one issue that I 
> just don’t understand why it has become a problem. I’ve had this 
> working before on an old acid platform but for some reason it’s 
> Reporting the local Lan IP instead of the public IP. Is there something 
> that needs to be done to resolve that on hamVoIP platform?

Example:

   -- Call accepted by 208.85.182.216 (format g726aal2)    -- Format for 
call is g726aal2    -- Executing [27892 at radio-secure:1] 
Rpt("IAX2/192.168.0.1:3344-1741", "27892") in new stack[Oct  8 11:57:36] 
WARNING[3298]: app_rpt.c:21583 rpt_exec: Node 27976 IP 208.85.182.216 
does not match link IP 192.168.0.1!!

If anyone had an example I can send along I would appreciate it.
 Lu
KA4EPS
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org