[arm-allstar] Courtesy tones

Mike Rhodes mike at mikerhodes.org
Mon Oct 11 10:46:29 EDT 2021


Agreed. I think it is remotetx= you are looking for.  I had the same issue
and took me a while to figure out which one it was. 

Mike
KD4LQS

-----Original Message-----
From: ARM-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
"Dave Petrie via ARM-allstar"
Sent: Monday, October 11, 2021 10:02 AM
To: ARM Allstar
Cc: Dave Petrie
Subject: Re: [arm-allstar] Courtesy tones

In the rpt.conf file make this change.
; Courtesy tone mapping

unlinkedct=ct18 ; Sent when not connected to another node
;to change when connected to another node look in telementry for remotetx=
and put in =|iK ; wa2kjc
;this means transceive mode when connected, to change monitor mode *2node
then change remotemon=
;remotect=ct18 ; Sent when remote base connected ; i don't have one setup
;linkunkeyct=ct15 ; sent when a network user unkeys
linkunkeyct=ct20

then down at the bottom of rpt.conf
[telemetry]
ct20=|m L
remotetx=|m K  ;this is what i put in for local cw k when unkeying with
remote connection to any node; wa2kjc

On Mon, Oct 11, 2021 at 9:51 AM "ve3rwj via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> You say you "are not getting what tone it is". What do you mean by that?
>
> Have you read courtesy_tone_howto.pdf available from the Hamvoip Website?
> https://hamvoip.org/#howtos
>
> Chris
>
>
>
> -----Original Message-----
> From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "Frans
> van
> Santbrink via ARM-allstar"
> Sent: October 11, 2021 6:00 AM
> To: arm-allstar at hamvoip.org
> Cc: Frans van Santbrink <frans.van.santbrink at gmail.com>
> Subject: Re: [arm-allstar] Courtesy tones
>
> Still hoping somebody out there knows where to change that tone...
>
> Frans van Santbrink,
> Mobile: (758) 715-3129
> IM: j69ds at hotmail.com
> Amateur Radio Operator: *J69DS - J62DX - J62YOTA - J64SLI*
>
>
> Member of: ARRL, J6 Portable, Buddipole DXpeditions, FM.HAM.RA, SLARC,
YOTA
>
>
> On Fri, Oct 8, 2021 at 8:52 PM Frans van Santbrink <
> frans.van.santbrink at gmail.com> wrote:
>
> > Hi all,
> >
> > I am trying to change my courtesy tone(s) My node in question alwas
> > has naother node connected. so when I key from rf (handy ) I get a tee
> > dum tone.
> > I got the tone for the network user (somebody from online or other
> > node) keys. but from local rf I am not getting which tone it is.
> > Any help is appreciated!
> >
> > Frans van Santbrink,
> > Mobile: (758) 715-3129
> > IM: j69ds at hotmail.com
> > Amateur Radio Operator: *J69DS - J62DX - J62YOTA - J64SLI*
> >
> >
> > Member of: ARRL, J6 Portable, Buddipole DXpeditions, FM.HAM.RA, SLARC,
> > YOTA
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org



More information about the ARM-allstar mailing list