[arm-allstar] Google Voice for commanding Hamvoip

[Michael Webb]

I think is very cool!  I've seen a couple YouTube videos of people adding
the full interactive Google Assistant to their setup as well but there was
no documentation.

Mike

On Thu, Nov 18, 2021, 9:52 AM "Dave Petrie via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I wrote a document on how to use Google Assistant for issuing voice
> commands to control the AllStar Asterisk Hamvoip Raspberry Pi Nodes. I
> found an article by 4X5MG and added to it and wrote it in a format for
> those that are comfortable with Windows 10 editing. I have found a couple
> of problems with Google Assistant but for the most part it is fantastic.
> Google won't accept more than 5 digits when using Monitor or Disconnect
> commands. I changed the Connect command to Connect To, adding the TO
> allowed me to use 6 digits sometimes but then that stopped as well. So as
> long as you know the digit restriction you can always use a macro.
> I have telemetry turned off and use an ascending and descending tone for
> connections and disconnections so it's cleaner when you connect to a busy
> net.
> Let me know your thoughts, I have attached a pdf but have the text version
> if need be. The spacing in the pdf should be fine for copy and paste.
> 73
> Dave
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: Google Assistant Hamvoip Voice Commands.pdf
> Type: application/pdf
> Size: 74823 bytes
> Desc: not available
> URL: <
> http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20211118/1e9ac70a/attachment.pdf
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>