[arm-allstar] linkunkeyct

[Paul KN2R]

This delay can be adjusted by changing this setting in your
[wait-timesXXXXX] stanza:
unkeywait=300

For bigger delay increase the setting.



On Thu, Nov 4, 2021 at 9:32 AM "Patrick Perdue via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Short answer, you can't. That delay is baked into the source of the
> app.rpt module. This is why I have linkunkeyct disabled on my simplex
> nodes. You can only change the delay from when someone unkeys from the
> RF side.
>
> I'd like to change this delay as well, but I also acknowledge that if
> there is any packet loss, and the delay is significantly decreased, it
> will go crazy with courtesy tones everywhere, since there is no packet
> that explicitly says "OK, I'm done talking now. Do whatever it is you're
> supposed to do." I got a preview of this by using DVSwitch/HUC via USRP,
> which plays a tone as soon as packets are not being received with no delay.
>
>
> On 11/3/2021 8:27 PM, "Dave Petrie via ARM-allstar" wrote:
> > I am looking to find out how to change the timing between a linked node
> > unkeying and me hearing the linkunkeyct. I want to be able to adjust the
> > time that my linkunkeyct is played after a connected node unkeys, by the
> > attached repeater receiver squelch closing or a global announcement stops
> > playing, I want to adjust the time it takes for my connected node to play
> > the linkunkeyct.
> > Thanks
> > Dave
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
-- 
-.- -. ..—- .-.