[arm-allstar] linkunkeyct

[Patrick Perdue]

Short answer, you can't. That delay is baked into the source of the 
app.rpt module. This is why I have linkunkeyct disabled on my simplex 
nodes. You can only change the delay from when someone unkeys from the 
RF side.

I'd like to change this delay as well, but I also acknowledge that if 
there is any packet loss, and the delay is significantly decreased, it 
will go crazy with courtesy tones everywhere, since there is no packet 
that explicitly says "OK, I'm done talking now. Do whatever it is you're 
supposed to do." I got a preview of this by using DVSwitch/HUC via USRP, 
which plays a tone as soon as packets are not being received with no delay.


On 11/3/2021 8:27 PM, "Dave Petrie via ARM-allstar" wrote:
> I am looking to find out how to change the timing between a linked node
> unkeying and me hearing the linkunkeyct. I want to be able to adjust the
> time that my linkunkeyct is played after a connected node unkeys, by the
> attached repeater receiver squelch closing or a global announcement stops
> playing, I want to adjust the time it takes for my connected node to play
> the linkunkeyct.
> Thanks
> Dave
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org