[arm-allstar] Transmit issue?
Temporarily Offline
temporarilyoffline at gmail.com
Wed May 26 08:43:33 EDT 2021
That worked great. I heard "hello" on my IC-706 as expected.
I then went to simple-usb and adjusted the audio receive levels (again) and
I saw that I was too "hot"... I reduced that down (again) and I am able to
get it working again.
Thanks!
On Wed, May 26, 2021 at 7:28 AM David McGough <kb4fxc at inttek.net> wrote:
>
> Okay, when the duplex value > 0, the linktolink parameter is ignored.
>
> From the asterisk CLI try manually playing a sound, for example:
>
> RPi3A*CLI> rpt localplay 1567 hello
> -- <DAHDI/pseudo-346262973> Playing 'hello' (language 'en')
> -- Hungup 'DAHDI/pseudo-346262973'
>
>
> ...replacing the 1567 with your node number. If this works, the problem
> is most likely some issue in the command scripting you've setup.
>
>
> 73, David KB4FXC
>
>
> On Wed, 26 May 2021, Temporarily Offline wrote:
>
> > I'm using duplex=1 and linktolink is commented out.
> >
> > I uncommented linktolink=yes, restarted asterisk and tried again, no
> change.
> >
> >
> > On Wed, May 26, 2021 at 7:12 AM David McGough <kb4fxc at inttek.net> wrote:
> >
> > >
> > > No localplay nor playback works if the rpt.conf node stanza is setup
> as:
> > >
> > > duplex=0
> > > linktolink=no
> > >
> > >
> > > ...If you're using this the duplex=0 mode, set:
> > >
> > > linktolink=yes
> > >
> > >
> > > And it should work. Or, use duplex=1, duplex=2 or duplex=3.
> > >
> > >
> > > 73, David KB4FXC
> > >
> > >
> > >
> > >
> > >
> > > On Wed, 26 May 2021, "Temporarily Offline via ARM-allstar" wrote:
> > >
> > > > Log below, but basically I can see that I'm able to key the Shari PI
> hat,
> > > > send *A1 and Shari/Asterisk will attempt to send my IP address back
> to
> > > me.
> > > >
> > > > I have 3 different radios and none of them hear the response.
> > > >
> > > > Any suggestions? I'm assuming its an incomplete solder connection,
> or a
> > > > software setting?
> > > >
> > > > Thanks in advance!
> > > > - Steve
> > > >
> > > > ---
> > > > [May 26 06:49:12] NOTICE[365]: chan_simpleusb.c:2719 simpleusb_read:
> Got
> > > > DTMF char *
> > > > [May 26 06:49:13] NOTICE[365]: chan_simpleusb.c:2719 simpleusb_read:
> Got
> > > > DTMF char A
> > > > [May 26 06:49:14] NOTICE[365]: chan_simpleusb.c:2719 simpleusb_read:
> Got
> > > > DTMF char 1
> > > > [May 26 06:49:14] NOTICE[365]: app_rpt.c:11256 function_cmd: cmd
> param =
> > > > /usr/local/sbin/sayip.sh 54199, digitbuf =
> > > > -- Remote UNIX connection
> > > > -- Remote UNIX connection disconnected
> > > > -- <DAHDI/pseudo-784568991> Playing '/tmp/ip' (language 'en')
> > > > -- Hungup 'DAHDI/pseudo-1780863917'
> > > > -- Hungup 'DAHDI/pseudo-784568991'
> > > > -- Remote UNIX connection
> > > > -- Remote UNIX connection disconnected
> > > > -- <DAHDI/pseudo-1116652995> Playing '/tmp/randommsg' (language
> 'en')
> > > > -- Hungup 'DAHDI/pseudo-1116652995'
> > > > _______________________________________________
> > > >
> > > > ARM-allstar mailing list
> > > > ARM-allstar at hamvoip.org
> > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >
> > > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > > >
> > >
> > >
> >
>
>
More information about the ARM-allstar
mailing list