[arm-allstar] CTCSS

[Matt Holder]

Thanks for the suggestion. I would rather not pull from after the discriminator as that will degrade the audio and the volume will be dependent on the radios volume setting. 
Was hoping to get some input on how the ctcss works in allstar either using the usbradio.conf or enabling txctcss in simpleusb. 

Sent from Yahoo Mail for iPhone


On Saturday, July 10, 2021, 5:39 PM, wrhowell amphibiansolutions.us via ARM-allstar <arm-allstar at hamvoip.org> wrote:

On those radios if you want the ctcss/pl tone to control audio then remove the connection from the discriminator and place it on the output of the tone controlled squelch or some other point past the discriminator and the tone control portion.


William
________________________________
From: ARM-allstar <arm-allstar-bounces at hamvoip.org> on behalf of "Matt Holder via ARM-allstar" <arm-allstar at hamvoip.org>
Sent: Saturday, July 10, 2021 4:04 PM
To: arm-allstar at hamvoip.org <arm-allstar at hamvoip.org>
Cc: Matt Holder <ke0ncp at yahoo.com>
Subject: [arm-allstar] CTCSS

Hello,
Not sure if I am sending to the right spot or not but here goes.
I am running 2 kenwood tk-860 G’s as a repeater and the ctcss on them just mutes locally but still sends the audio through the discriminator and to allstar l.
I’ve seen a few things about ctcss tones with allstar and just looking for some guidance on the subject.
Best,Matt - ke0ncp
Sent from Yahoo Mail for iPhone
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org