[arm-allstar] Pi4 B & HDMI console?

[John Hogenmiller]

I had a blank/black screen on the Pi3B with the hamvoip image. But as a “last resort” I tried it on a different (smaller) monitor and it came right up. 

-John/KB3DFZ

> On Jan 5, 2021, at 3:52 PM, Jeremy georges via ARM-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Hi folks,
> I'm new to this mailing list and to Allstar; but not new to RaspPI. Been working with Raspberry PI since the first PI was released. But I'm having issues with booting the RPi2/RPi2-3-4_V1.6-01_Allstar.img image and the HDMI output. Works just fine if I flash/boot with Raspbian Buster.But when I flash with the Allstar image, I don't get HDMI console.
> I checked the MD5 checksum and it matches...so know that the local image / copy I'm using at least matches.
> I went in and tweaked the config.txt & cmdline.txt so that I can at least connect to the UART/console and do some initial configuration. But before I go in and start trying to troubleshoot the HDMI issue...is this a known issue with this image?
> 
> 
> Thanks,
> -J
> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org