[arm-allstar] Pi4 B & HDMI console?

[David McGough]

Hi Jeremy,

HDMI typically works fine with HamVoIP installs. You must have the monitor 
plugged in and on when you boot the RPi.

Are you sure the RPi4B is booting HamVoIP?  If it won't boot, you need an 
updated firmware image, which can be found here:

https://hamvoip.org/RPi2/RPi2-3-4_V1.6-14_Allstar.img.xz

or:

https://hamvoip.org/RPi2/RPi2-3-4_V1.6-14_Allstar.exe


73, David KB4FXC

On Tue, 5 Jan 2021, "Jeremy georges via ARM-allstar" wrote:

> Hi folks,
> I'm new to this mailing list and to Allstar; but not new to RaspPI. Been working with Raspberry PI since the first PI was released. But I'm having issues with booting the RPi2/RPi2-3-4_V1.6-01_Allstar.img image and the HDMI output. Works just fine if I flash/boot with Raspbian Buster.But when I flash with the Allstar image, I don't get HDMI console.
> I checked the MD5 checksum and it matches...so know that the local image / copy I'm using at least matches.
> I went in and tweaked the config.txt & cmdline.txt so that I can at least connect to the UART/console and do some initial configuration. But before I go in and start trying to troubleshoot the HDMI issue...is this a known issue with this image?
> 
> 
> Thanks,
> -J
> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>