[arm-allstar] Remove courtesy tone

[Steve Polley]

Looks like this was the fix.

Thanks

On Sat, Feb 13, 2021 at 6:34 AM "Jason Schollenberger via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> We ran into the same issue and quickly realized duplex=0 / linktolink=yes
> doesn't function the same as enabling one of the duplex profiles. nounkeyct
> is ignored, for one...
>
> My workaround was to use duplex=3 and made this custom courtesy tone:
>
> ct9=|t(0,0,1,0);
>
> 0 frequency, 1ms duration, 0 amplitude. Note that duration can't be 0, IIRC
> that caused it to transmit continuously. This has been working well for us
> and gets us the hang time and other functionality but no CT.
>
> - Jason
>
> On Thu, Feb 11, 2021 at 11:42 PM "Steve Polley via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > I have enabled telemetry so that my Autosky alerts will function but I
> want
> > to remove the courtesy tone as this is a remote based linked via RF and I
> > do not want to send the CT over the repeater that it is linked to as it
> has
> > its own controller and courtesy tones.
> >
> > I have set in rpt.conf nounkeyct=1 which I think should turn off courtesy
> > tones unless I am missing something here.
> >
> > Any ideas?
> >
> > Steve
> > N0SWP
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>