[arm-allstar] Remove courtesy tone

[Jason Schollenberger]

We ran into the same issue and quickly realized duplex=0 / linktolink=yes
doesn't function the same as enabling one of the duplex profiles. nounkeyct
is ignored, for one...

My workaround was to use duplex=3 and made this custom courtesy tone:

ct9=|t(0,0,1,0);

0 frequency, 1ms duration, 0 amplitude. Note that duration can't be 0, IIRC
that caused it to transmit continuously. This has been working well for us
and gets us the hang time and other functionality but no CT.

- Jason

On Thu, Feb 11, 2021 at 11:42 PM "Steve Polley via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I have enabled telemetry so that my Autosky alerts will function but I want
> to remove the courtesy tone as this is a remote based linked via RF and I
> do not want to send the CT over the repeater that it is linked to as it has
> its own controller and courtesy tones.
>
> I have set in rpt.conf nounkeyct=1 which I think should turn off courtesy
> tones unless I am missing something here.
>
> Any ideas?
>
> Steve
> N0SWP
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>