[arm-allstar] Turn on PL on demand

[john at qso.com]

Hi Steve. Thank you for the reminder. I read that a few years ago and was
intrigued. My thinking is since app-rpt  has the functionality built-in
already, (although using usbradio), that perhaps it could be implemented,
but keeping the repeater decoding the input. 

I was looking at COP 58 and 59, and found a PDF write-up on hamvoip, but the
more I read, the more confused I got.
Would this be a solution, and where do you set the PL frequency for it if
so? I couldn't work out if the PL outputs on the output or the input. 

-----Original Message-----
From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "Steve
Smith via ARM-allstar"
Sent: Thursday, September 24, 2020 5:59 PM
To: ARM Allstar <arm-allstar at hamvoip.org>
Cc: Steve Smith <stevewsmith at chartermi.net>
Subject: Re: [arm-allstar] Turn on PL on demand

If you are looking for a way to generate the transmit PL using the Pi have a
look at https://hamprojects.info/pitone-ctcss-tone-generator/

Steve - N8AR


------ Original Message ------
From: "John Griffith via ARM-allstar" <arm-allstar at hamvoip.org>
To: "'David McGough'" <kb4fxc at inttek.net>; "'\"John Griffith via
ARM-allstar\"'" <arm-allstar at hamvoip.org>
Cc: john at qso.com
Sent: 9/24/2020 2:00:36 PM
Subject: Re: [arm-allstar] Turn on PL on demand

>
>
>That's a fair question. Quantar fed by a DMK URI. I do have access to 
>settings on the repeater.
>I figured the easiest way would be to generate the tone in the Pi 
>itself.
>
>-----Original Message-----
>From: David McGough <kb4fxc at inttek.net>
>Sent: Thursday, September 24, 2020 5:43 AM
>To: "John Griffith via ARM-allstar" <arm-allstar at hamvoip.org>
>Cc: john at qso.com
>Subject: Re: [arm-allstar] Turn on PL on demand
>
>
>What type repeater?
>
>
>On Wed, 23 Sep 2020, "John Griffith via ARM-allstar" wrote:
>
>>  Hi everyone.
>>
>>  I have the need to turn on transmit PL on my repeater when it hears 
>> a
>DTMF
>>  sequence.  Is there a way to program a cop code from a macro that  
>> turns
>on
>>  transmit PL and turns it back off on a different sequence?
>>
>>  I am running simple USB, and the receiver is feeding COR to the Pi 
>> for  receive PL.
>>
>>  Thank you
>>  John, N7OKN
>>
>>
>>
>>  _______________________________________________
>>
>>  ARM-allstar mailing list
>>  ARM-allstar at hamvoip.org
>>  http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>>  Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>
>
>
>
>
>
>_______________________________________________
>
>ARM-allstar mailing list
>ARM-allstar at hamvoip.org
>http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org