[arm-allstar] Turn on PL on demand

[Steve Smith]

If you are looking for a way to generate the transmit PL using the Pi 
have a look at https://hamprojects.info/pitone-ctcss-tone-generator/

Steve - N8AR


------ Original Message ------
From: "John Griffith via ARM-allstar" <arm-allstar at hamvoip.org>
To: "'David McGough'" <kb4fxc at inttek.net>; "'\"John Griffith via 
ARM-allstar\"'" <arm-allstar at hamvoip.org>
Cc: john at qso.com
Sent: 9/24/2020 2:00:36 PM
Subject: Re: [arm-allstar] Turn on PL on demand

>
>
>That's a fair question. Quantar fed by a DMK URI. I do have access to
>settings on the repeater.
>I figured the easiest way would be to generate the tone in the
>Pi itself.
>
>-----Original Message-----
>From: David McGough <kb4fxc at inttek.net>
>Sent: Thursday, September 24, 2020 5:43 AM
>To: "John Griffith via ARM-allstar" <arm-allstar at hamvoip.org>
>Cc: john at qso.com
>Subject: Re: [arm-allstar] Turn on PL on demand
>
>
>What type repeater?
>
>
>On Wed, 23 Sep 2020, "John Griffith via ARM-allstar" wrote:
>
>>  Hi everyone.
>>
>>  I have the need to turn on transmit PL on my repeater when it hears a
>DTMF
>>  sequence.  Is there a way to program a cop code from a macro that
>>  turns
>on
>>  transmit PL and turns it back off on a different sequence?
>>
>>  I am running simple USB, and the receiver is feeding COR to the Pi for
>>  receive PL.
>>
>>  Thank you
>>  John, N7OKN
>>
>>
>>
>>  _______________________________________________
>>
>>  ARM-allstar mailing list
>>  ARM-allstar at hamvoip.org
>>  http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>>  Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>
>
>
>
>
>
>_______________________________________________
>
>ARM-allstar mailing list
>ARM-allstar at hamvoip.org
>http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>Visit the BBB and RPi2/3/4 web page - http://hamvoip.org