[arm-allstar] Cellular Modem

[Doug Crompton]

David,

   What modem make and model are you using?  Perhaps two things that might
be the problem -

Possibly needs to be IPv6 in Archlinux. This is turned off by default.
Also ppp, if you are using ppp, needs authentication to your provider -
probably chap. -  setting this up to pass your Tmobile  pw.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Fri, May 29, 2020 at 1:36 PM "David Panscik via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Ive been trying (unsuccessfully) to get a cellular USB modem to use as a
> portable internet connection for HamVOIP.
> Ive attempted to follow a few different set of instructions to no avail.
> I install ppp and i install usb_modeswitch
> using minicom terminal, I get a connection with the following AT command
> AT+CGDCONT=1,"IPV4V6","fast.t-mobile.com"
>
> The connection stays connected for approximately 10 seconds, then
> disconnects.  You can see that here with the SMONI command
> AT^SMONI^SMONI:
> 4G,2325,4,15,15,FDD,310,260,C3D3,F5030E2,503,--,-75,-6.0,CONN
> OKAT^SMONI^SMONI:
> 4G,2325,4,15,15,FDD,310,260,C3D3,F5030E2,503,35,-74,-6.5,NOCONN
>
> Im not sure what to troubleshoot from here...
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org