[arm-allstar] Rx only site

[Doug Crompton]

So you can't just physically disconnect the PTT on that node?  cop 2 and 3
turn TX on and off BUT when off it also disallows any connects. If you
connect first then turn off the TX it should work allowing only RX from
that node but no other connects TO that node.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sun, May 17, 2020 at 4:04 PM "Tom Eaton via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> OK, Doug
> The rx is at a remote location that can call out but not incoming, so the
> remote node is set up to connect out to the tx site at boot, so I cannot
> have the tx site connect to the rx site in monitor only. that is why I am
> looking for a way to disable ptt at rx node.
>
> Thanks
> Tom
>
> On Sun, May 17, 2020 at 2:02 PM "Doug Crompton via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Tom,
> >
> >   Maybe I am not understanding what you want to do but isn't this what
> > monitor mode does? Rx only from a node,
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> >
> > On Sun, May 17, 2020 at 1:06 PM "Tom Eaton via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Is there a setting in rpt.conf so I can disable ptt on a rx node only,
> I
> > > want it to work just as it does if the rx node is connected to the tx
> > node,
> > > but if I set the rx node to repeater disable it works the way I want it
> > to.
> > > I have it set duplex=0, but on the rx node it shows ptt back from the
> tx
> > > node which makes rx node unable to then receive be cause it is in tx .
> I
> > > need traffic in one way from rx node to tx only.
> > >
> > > Thanks
> > > Tom
> > >
> > > <
> > >
> >
> https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon
> > > >
> > > Virus-free.
> > > www.avast.com
> > > <
> > >
> >
> https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link
> > > >
> > > <#m_8778912918431924907_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>