[arm-allstar] Macro Not Found

[Jay Urish]

And folks,

This is why you LOOK AT THE LOGS!


On 3/21/20 11:16 PM, "Doug Crompton via ARM-allstar" wrote:
> This was resolved but since we did it off-line I wanted to at least tell
> everyone the resolution. The system was not setup properly for some reason
> so I did a setup for him remotely and at that point all was well but then
> when he went to connect somewhere he got the Macro not found message. It
> turns out that the 3 digit was not working on his handheld DTMF and when he
> tried to connect he was doing *35....  And instead it was doing *5.... and
> looking for a macro!
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Sat, Mar 21, 2020 at 10:48 AM Doug Crompton <wa3dsp at gmail.com> wrote:
>
>> Jerry,
>>
>>   First of all this has nothing to do with your hardware (repeater etc.)
>> Rather than going back and forth in emails can you send me privately your
>> node number and login password so I can login and look at it. You need to
>> have port 222 forwarded in your router and the node running. Also give me
>> your phone number.  My email is wa3dsp at gmail.com
>>
>>
>> *73 Doug*
>>
>> *WA3DSP*
>>
>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>>
>> On Sat, Mar 21, 2020 at 1:33 AM "David McGough via ARM-allstar" <
>> arm-allstar at hamvoip.org> wrote:
>>
>>>
>>> Hello Everyone,
>>>
>>> I have an issue that I cannot get past. I am setting up a repeater
>>> using a CDM 1550 for TX and a CDM 750 for RX.
>>>
>>> I have re-flashed the micro usb several time to try different setup
>>> configurations and nothing I do seem to change my problem. After the setup
>>> is complete I try to connect to a 6 digit node and I get the response
>>> "macro not found" but the 6 digit node can connect to mine. When I try
>>> toconnect to a 5 digit node I get a curiosity tone but no response that I
>>> am connected to the node. When I watch it in Asterisk, I see the digits
>>> but when I finish sending them the only response is a "hangup" Any help
>>> would be greatly appreciated.
>>>
>>> Jerry Conner
>>>
>>>
>>>
>>> _______________________________________________
>>>
>>> ARM-allstar mailing list
>>> ARM-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>
>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org