[arm-allstar] Macro Not Found

[Doug Crompton]

Jerry,

 First of all this has nothing to do with your hardware (repeater etc.)
Rather than going back and forth in emails can you send me privately your
node number and login password so I can login and look at it. You need to
have port 222 forwarded in your router and the node running. Also give me
your phone number.  My email is wa3dsp at gmail.com


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Sat, Mar 21, 2020 at 1:33 AM "David McGough via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

>
>
> Hello Everyone,
>
> I have an issue that I cannot get past. I am setting up a repeater
> using a CDM 1550 for TX and a CDM 750 for RX.
>
> I have re-flashed the micro usb several time to try different setup
> configurations and nothing I do seem to change my problem. After the setup
> is complete I try to connect to a 6 digit node and I get the response
> "macro not found" but the 6 digit node can connect to mine. When I try
> toconnect to a 5 digit node I get a curiosity tone but no response that I
> am connected to the node. When I watch it in Asterisk, I see the digits
> but when I finish sending them the only response is a "hangup" Any help
> would be greatly appreciated.
>
> Jerry Conner
>
>
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>