[arm-allstar] All Star Node Repeater Controller

[Doug Crompton]

Ron,

 If *81 or *82 are distorted then you have too much gain in item 3.  Turn
it down. The idea is not to mess with the telemetry levels and set item 3
first with telemnomdb=0.  The announcements should not sound distorted. If
they do item 3 is too high. Then after they sound good if you want to
further reduce telemetry levels you can setting  telemnomdb= some minus
value. Also remember when you change these values in rpt.conf you need to
do a restart, simpleusb changes are immediate.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Thu, Mar 5, 2020 at 12:06 PM "Ron Gilson via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Many thanks for all the suggestions re. my portable repeater controller.  I
> found that a new image solved my problems except *81 and *82 commands and
> time announcements.  Apparently there is a separate volume adjustment for
> these as they are very distorted.  *80 works well as does the repeat
> audio.  Guess I must have too many 1's and not enough 0"s in on my chip.
> (HaHa).  Thanks again.
> WA2WWK  Ron
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>