[arm-allstar] New IRLP install

[David McGough]

Eric,

The "No Channel type registered" message means the chan_irlp channel
driver isn't loaded.

You can try manually loading this driver from the asterisk CLI. That will 
tell you the most info about what's wrong.  For example:

Cloud061*CLI> module load chan_irlp.so 
[Jan  2 10:47:47] NOTICE[9944]: chan_irlp.c:1962 load_module: Unable to load config irlp.conf


.....In my test case, there is no /etc/asterisk/irlp.conf file present. 
So, the driver won't load.

If the driver does load correctly, then the problem is in the
/etc/asterisk/modules.conf file. Make sure the chan_irlp.so driver is
allowed to load.

73, David KB4FXC



On Thu, 2 Jan 2020, "Eric Harrison via ARM-allstar" wrote:

> I understand the importance of rebooting. However rebooting and
> reinstalling IRLP support did not solve this issue. No matter how I command
> IRLP whether it be in CLI or Supermon or DTMF keys  when I try and access
> another IRLP node, CLI gives me an error
> 
> [Jan 2 08:50:04] WARRING [525] : channel.c:3039 ast_request : No Channel
> type registered for 'IRLP'
> 
> Eric
> 
> N7JYS
> 
> On Thu, Jan 2, 2020 at 12:20 AM "Doug Crompton via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
> > Eric,
> >
> >  As Dave pointed out you run nothing manually except what is stated in the
> > howto. I updated the howto at hamvoip.org which hopefully makes this
> > clear.
> > Do what the install instructions say and reboot and you should be good to
> > go. If you have already run things you should not then you may need to
> > start over.
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> > On Wed, Jan 1, 2020 at 4:59 PM "Eric Harrison via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > After hearing problem with and IRLP intalls i decided to Try a new IRLP
> > > install, (IRLP 3905 installed on  Allstar node  42285. I already have one
> > > allstar node, 28302  working with IRLP3917 that was install about a year
> > > ago.
> > >
> > > After the New install, i ran the enable script /home/irlp/scripts/enable
> > > and got errors that point to symbolic links in /home/irlp directory that
> > > point to  /var/log/irlp which do not exist, and were never created by the
> > > install.
> > >
> > > These files all exist on my Allstar node 28302  (IRLP 3917).
> > >
> > > The new install is missing the directory /var/log/irlp and all its files.
> > > Not sure why this was never created in this new install. Even a second
> > > attempt did not resolve the issue.
> > >
> > > Eric
> > >
> > > N7JYS
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>