[arm-allstar] odd node behavior

[Mike Sullivan]

Sounds like you are set up in a half-duplex mode and not full duplex to me.
Can you post your node info from rpt.conf and which duplex= setting youre
using?

Mike

On Sat, Feb 22, 2020 at 22:46 "c b via ARM-allstar" <arm-allstar at hamvoip.org>
wrote:

> one of my nodes that has operated nicely for quite a while has started a
> odd behavior.
>
> most of the time it works as expected.
>
> the setup is a repeater that is full time linked.
>
> at times the repeat node stops sending  PTT in response to a signal on its
> input., during this failed condition it is properly coming out the other
> nodes it is linked to, and when the operator on the linked repeater
> responds it keys the node that has stopped as expected.
>
> basically the node will respond to another node but stops functioning as a
> repeater, it is acting more link a link.the after 30 seconds or so it is
> back to normal.
>
> Nodes are on the latest update and have been rebooted. There is only one
> URI per raspberry pie.
>
> any ideas appreciated.
>
> Chris
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>