[arm-allstar] Pi3 All Star Repeater Controller

[Doug Crompton]

Ron,

 You say you built a repeater controller I guess meaning you put a node in
duplex=2  and you connected the audio in and COS of a FOB to a receiver and
the PTT and audio out of a FOB to a transmitter ????  What is the receiver
and transmitter? It sounds like a level problem. You can't always just
connect FOB inputs and outputs to radios directly. Sometimes you need
voltage dividers to set levels. Have you checked the levels?


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Sat, Feb 22, 2020 at 9:06 PM "Ron Gilson via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hi all.  I've built up a repeater controller using All Star as a
> controller.  The ID seems distorted and the DTMF does not function?
> Repeated audio is great *80 etc. seems to be ignored even though the tones
> are clean on the receiver?  I'vd tried different portables but nothing
> seems to work.  Any suggestions would be greatly appreciated.  Thanks for
> your help.
> Ron
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>