[arm-allstar] ARM-allstar Digest, Vol 79, Issue 24
Peter Paul Fox
g8hav at msn.com
Thu Dec 17 16:06:15 EST 2020
Hi, thanks for the reply. When the ethernet cable is removed during reboot, I cannot SSH on WiFi. When I plug the ethernet cable in I can SSH on 22 and 29.
I know the dhcpcd.conf has the ethernet settings, I'm not sure where the WiFi settings are located. Will have a look using WinScp
Otherwise it's a reinstall. Node number is 42879
Get Outlook for Android<https://aka.ms/ghei36>
Get Outlook for Android<https://aka.ms/ghei36>
________________________________
From: ARM-allstar <arm-allstar-bounces at hamvoip.org> on behalf of arm-allstar-request at hamvoip.org <arm-allstar-request at hamvoip.org>
Sent: Thursday, December 17, 2020 5:00:01 PM
To: arm-allstar at hamvoip.org <arm-allstar at hamvoip.org>
Subject: ARM-allstar Digest, Vol 79, Issue 24
Send ARM-allstar mailing list submissions to
arm-allstar at hamvoip.org
To subscribe or unsubscribe via the World Wide Web, visit
https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.hamvoip.org%2Fcgi-bin%2Fmailman%2Flistinfo%2Farm-allstar&data=04%7C01%7C%7Cd0228860c4dc436b4a0008d8a2ad3408%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637438212068206495%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=5DMCz1HwVkvUba%2BbV3PPUSwtOXC6y9tA5Km0G%2FmeFKE%3D&reserved=0
or, via email, send a message with subject or body 'help' to
arm-allstar-request at hamvoip.org
You can reach the person managing the list at
arm-allstar-owner at hamvoip.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of ARM-allstar digest..."
Today's Topics:
1. Re: Blacklist (Bryan St Clair)
2. Re: Blacklist (David H.)
3. eth0 & wlan0 (Peter Paul Fox)
4. Re: Blacklist (Bryan St Clair)
5. Re: eth0 & wlan0 (Bryan St Clair)
----------------------------------------------------------------------
Message: 1
Date: Wed, 16 Dec 2020 09:16:15 -0800
From: Bryan St Clair <bryan at k6cbr.us>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] Blacklist
Message-ID:
<CAH5oE6bbj4nao2Du=UP-cU1MX6JKcgY_9nVfO8r2Am1ow6ikuQ at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
It is current.
Post your [radio] config from iax.conf
Then the stanza it is pointed to from extensions.conf
Maybe something is wrong there.
Bryan
On Wed, Dec 16, 2020, 08:58 "David H. via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:
> I have used both the HAMVOIP instructions, and the ASL instructions, for
> implementing the black list. Both give me the same error.
>
> [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> '_XXXX!', priority 1 in 'blacklist', already in use
> [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> '_XXXX!', priority 2 in 'blacklist', already in use
> [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> '_XXXX!', priority 3 in 'blacklist', already in use
> [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> '_XXXX!', priority 4 in 'blacklist', already in use
> [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> '_XXXX!', priority 1 in 'whitelist', already in use
> [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> '_XXXX!', priority 2 in 'whitelist', already in use
> [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> '_XXXX!', priority 3 in 'whitelist', already in use
> [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> '_XXXX!', priority 4 in 'whitelist', already in use
> [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> '_XXXX!', priority 5 in 'whitelist', already in use
>
> There is nothing in the blacklist or whitelist, at the moment, so nothing
> should be in use. Are the instructions outdated now?
>
> ---
> Sent From Mail For Windows 10 On My HP Envy x360 Ultrabook.
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.hamvoip.org%2Fcgi-bin%2Fmailman%2Flistinfo%2Farm-allstar&data=04%7C01%7C%7Cd0228860c4dc436b4a0008d8a2ad3408%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637438212068206495%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=5DMCz1HwVkvUba%2BbV3PPUSwtOXC6y9tA5Km0G%2FmeFKE%3D&reserved=0
>
> Visit the BBB and RPi2/3/4 web page - https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fhamvoip.org%2F&data=04%7C01%7C%7Cd0228860c4dc436b4a0008d8a2ad3408%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637438212068206495%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=MOu3XJ03KXvZ4EDeorZ2D%2BMwywcYXGIo3LpehNCwr54%3D&reserved=0
>
------------------------------
Message: 2
Date: Wed, 16 Dec 2020 15:44:54 -0600
From: David H. <dwh0305 at aol.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] Blacklist
Message-ID: <mailman.860.1608155439.2794.arm-allstar at hamvoip.org>
Content-Type: text/plain; charset="utf-8"
Bryan:
I finally got it figured out. HAMVOIP already has the necessary functionality built in, which I didn?t realize at first, because the tutorial that is referenced said that it was optional and needed to be manually added. I went through and undid what the tutorial told me to do and the errors have ceased. Thanks for the reply.
---
Sent From Mail For Windows 10 On My HP Envy x360 Ultrabook.
From: Bryan St Clair via ARM-allstar
Sent: Wednesday, December 16, 2020 11:17 AM
To: ARM Allstar
Cc: Bryan St Clair
Subject: Re: [arm-allstar] Blacklist
It is current.
Post your [radio] config from iax.conf
Then the stanza it is pointed to from extensions.conf
Maybe something is wrong there.
Bryan
On Wed, Dec 16, 2020, 08:58 "David H. via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:
> I have used both the HAMVOIP instructions, and the ASL instructions, for
> implementing the black list. Both give me the same error.
>
> [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> '_XXXX!', priority 1 in 'blacklist', already in use
> [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> '_XXXX!', priority 2 in 'blacklist', already in use
> [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> '_XXXX!', priority 3 in 'blacklist', already in use
> [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> '_XXXX!', priority 4 in 'blacklist', already in use
> [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> '_XXXX!', priority 1 in 'whitelist', already in use
> [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> '_XXXX!', priority 2 in 'whitelist', already in use
> [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> '_XXXX!', priority 3 in 'whitelist', already in use
> [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> '_XXXX!', priority 4 in 'whitelist', already in use
> [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> '_XXXX!', priority 5 in 'whitelist', already in use
>
> There is nothing in the blacklist or whitelist, at the moment, so nothing
> should be in use. Are the instructions outdated now?
>
> ---
> Sent From Mail For Windows 10 On My HP Envy x360 Ultrabook.
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.hamvoip.org%2Fcgi-bin%2Fmailman%2Flistinfo%2Farm-allstar&data=04%7C01%7C%7Cd0228860c4dc436b4a0008d8a2ad3408%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637438212068206495%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=5DMCz1HwVkvUba%2BbV3PPUSwtOXC6y9tA5Km0G%2FmeFKE%3D&reserved=0
>
> Visit the BBB and RPi2/3/4 web page - https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fhamvoip.org%2F&data=04%7C01%7C%7Cd0228860c4dc436b4a0008d8a2ad3408%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637438212068206495%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=MOu3XJ03KXvZ4EDeorZ2D%2BMwywcYXGIo3LpehNCwr54%3D&reserved=0
>
_______________________________________________
ARM-allstar mailing list
ARM-allstar at hamvoip.org
https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.hamvoip.org%2Fcgi-bin%2Fmailman%2Flistinfo%2Farm-allstar&data=04%7C01%7C%7Cd0228860c4dc436b4a0008d8a2ad3408%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637438212068206495%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=5DMCz1HwVkvUba%2BbV3PPUSwtOXC6y9tA5Km0G%2FmeFKE%3D&reserved=0
Visit the BBB and RPi2/3/4 web page - https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fhamvoip.org%2F&data=04%7C01%7C%7Cd0228860c4dc436b4a0008d8a2ad3408%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637438212068216453%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=RL3YXf6%2FteVGGPD0RPTJjEeUDU%2Bagqf8UxANJMvMtvQ%3D&reserved=0
------------------------------
Message: 3
Date: Wed, 16 Dec 2020 21:47:15 +0000
From: Peter Paul Fox <g8hav at msn.com>
To: "arm-allstar at hamvoip.org" <arm-allstar at hamvoip.org>
Subject: [arm-allstar] eth0 & wlan0
Message-ID:
<LO2P265MB3086E15393E47E9ABA743F8AE5C50 at LO2P265MB3086.GBRP265.PROD.OUTLOOK.COM>
Content-Type: text/plain; charset="Windows-1252"
Hi all,
I have an odd problem which has appeared. When I have the ethernet cable plugged into the RPi I can SSH into it using either the eth0 IP or the wlan0 IP value (both different) When I remove the ethernet cable I cannot SSH into wlan0
I put the cable back in and SSH into Allstar. And at the top of the menu it says;
Admin Menu List for RPI (192.168.xx.29, 192.168.xx.22) and restarted the Asterick Server I get
Automatically restarting Asterisk Restart Asterisk Server ended with exit status 1
Asterisk died with code1.
Using Supermon I try to connect to a local Node but it attempts and quits without any message.
Running CLI I get
WARNING[26810]: chan_iax2.c:7844 registry_rerequest: Received unsolicited registry authenticate request from '192.83.199.4'
When I run ifconfig I get this and I notice ?Ethernet? is in both eth0 and wlan0
192.168.xx.255 is not my gateway.
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.xx.29 netmask 255.255.255.0 broadcast 192.168.xx.255
ether b8:27:eb:c0:20:1e txqueuelen 1000 (Ethernet)
RX packets 5919616 bytes 301440965 (287.4 MiB)
RX errors 0 dropped 2851 overruns 0 frame 0
TX packets 645355 bytes 59791574 (57.0 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 1000 (Local Loopback)
RX packets 1190591 bytes 95612400 (91.1 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1190591 bytes 95612400 (91.1 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.xx.22 netmask 255.255.255.0 broadcast 192.168.xx.255
ether 00:36:00:00:f7:d2 txqueuelen 1000 (Ethernet)
RX packets 6391903 bytes 431486329 (411.4 MiB)
RX errors 0 dropped 361674 overruns 0 frame 0
TX packets 18637 bytes 1161330 (1.1 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
There must be an error in a config file but my knowledge of Linux works if I can do the correct search, but not managed to find the route. I know I can rebuild from scratch easily but sometimes I like to find the problem in case it occurs again.
Peter Paul Fox G8HAV
5 Llandovery Close
WINSFORD CW7 1NA
Tel: +447919315547
Dane Valley RAYNET
Midcars.org
------------------------------
Message: 4
Date: Wed, 16 Dec 2020 14:04:12 -0800
From: Bryan St Clair <bryan at k6cbr.us>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] Blacklist
Message-ID:
<CAH5oE6Zb+pbaBDNG=8hc+PzgQQo5emPiA6+P5kNFx_t+o36z1Q at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
Ah, yes. The image was updated and now only minor edits are needed.
Glad to hear ya have it working.
On Wed, Dec 16, 2020 at 1:50 PM "David H. via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:
> Bryan:
> I finally got it figured out. HAMVOIP already has the necessary
> functionality built in, which I didn?t realize at first, because the
> tutorial that is referenced said that it was optional and needed to be
> manually added. I went through and undid what the tutorial told me to do
> and the errors have ceased. Thanks for the reply.
>
> ---
> Sent From Mail For Windows 10 On My HP Envy x360 Ultrabook.
>
> From: Bryan St Clair via ARM-allstar
> Sent: Wednesday, December 16, 2020 11:17 AM
> To: ARM Allstar
> Cc: Bryan St Clair
> Subject: Re: [arm-allstar] Blacklist
>
> It is current.
>
> Post your [radio] config from iax.conf
>
> Then the stanza it is pointed to from extensions.conf
>
> Maybe something is wrong there.
>
> Bryan
>
> On Wed, Dec 16, 2020, 08:58 "David H. via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > I have used both the HAMVOIP instructions, and the ASL instructions, for
> > implementing the black list. Both give me the same error.
> >
> > [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> > '_XXXX!', priority 1 in 'blacklist', already in use
> > [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> > '_XXXX!', priority 2 in 'blacklist', already in use
> > [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> > '_XXXX!', priority 3 in 'blacklist', already in use
> > [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> > '_XXXX!', priority 4 in 'blacklist', already in use
> > [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> > '_XXXX!', priority 1 in 'whitelist', already in use
> > [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> > '_XXXX!', priority 2 in 'whitelist', already in use
> > [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> > '_XXXX!', priority 3 in 'whitelist', already in use
> > [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> > '_XXXX!', priority 4 in 'whitelist', already in use
> > [Dec 16 06:00:45] WARNING[333] pbx.c: Unable to register extension
> > '_XXXX!', priority 5 in 'whitelist', already in use
> >
> > There is nothing in the blacklist or whitelist, at the moment, so nothing
> > should be in use. Are the instructions outdated now?
> >
> > ---
> > Sent From Mail For Windows 10 On My HP Envy x360 Ultrabook.
> >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.hamvoip.org%2Fcgi-bin%2Fmailman%2Flistinfo%2Farm-allstar&data=04%7C01%7C%7Cd0228860c4dc436b4a0008d8a2ad3408%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637438212068216453%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=ONiLoixS2eWl78vlOldj1laUzsIBVJqsgODb3bbL1F4%3D&reserved=0
> >
> > Visit the BBB and RPi2/3/4 web page - https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fhamvoip.org%2F&data=04%7C01%7C%7Cd0228860c4dc436b4a0008d8a2ad3408%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637438212068216453%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=RL3YXf6%2FteVGGPD0RPTJjEeUDU%2Bagqf8UxANJMvMtvQ%3D&reserved=0
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.hamvoip.org%2Fcgi-bin%2Fmailman%2Flistinfo%2Farm-allstar&data=04%7C01%7C%7Cd0228860c4dc436b4a0008d8a2ad3408%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637438212068216453%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=ONiLoixS2eWl78vlOldj1laUzsIBVJqsgODb3bbL1F4%3D&reserved=0
>
> Visit the BBB and RPi2/3/4 web page - https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fhamvoip.org%2F&data=04%7C01%7C%7Cd0228860c4dc436b4a0008d8a2ad3408%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637438212068216453%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=RL3YXf6%2FteVGGPD0RPTJjEeUDU%2Bagqf8UxANJMvMtvQ%3D&reserved=0
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.hamvoip.org%2Fcgi-bin%2Fmailman%2Flistinfo%2Farm-allstar&data=04%7C01%7C%7Cd0228860c4dc436b4a0008d8a2ad3408%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637438212068216453%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=ONiLoixS2eWl78vlOldj1laUzsIBVJqsgODb3bbL1F4%3D&reserved=0
>
> Visit the BBB and RPi2/3/4 web page - https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fhamvoip.org%2F&data=04%7C01%7C%7Cd0228860c4dc436b4a0008d8a2ad3408%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637438212068216453%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=RL3YXf6%2FteVGGPD0RPTJjEeUDU%2Bagqf8UxANJMvMtvQ%3D&reserved=0
--
Bryan
K6CBR
bryan at k6cbr.us
43918,439910
------------------------------
Message: 5
Date: Wed, 16 Dec 2020 14:46:16 -0800
From: Bryan St Clair <bryan at k6cbr.us>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] eth0 & wlan0
Message-ID:
<CAH5oE6Ya8ZmNnwpg_81DEggbbEv_Wa=ao9tvFzOH-tZVBk--7g at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
I am not sure running both at the same time is a great idea.
If you reboot the node, with the ethernet cable disconnected, does your SSH
connection work on Wifi?
Bryan
On Wed, Dec 16, 2020 at 1:50 PM "Peter Paul Fox via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:
> Hi all,
>
> I have an odd problem which has appeared. When I have the ethernet cable
> plugged into the RPi I can SSH into it using either the eth0 IP or the
> wlan0 IP value (both different) When I remove the ethernet cable I cannot
> SSH into wlan0
> I put the cable back in and SSH into Allstar. And at the top of the menu
> it says;
> Admin Menu List for RPI (192.168.xx.29, 192.168.xx.22) and restarted the
> Asterick Server I get
> Automatically restarting Asterisk Restart Asterisk Server
> ended with exit status 1
> Asterisk died with code1.
>
> Using Supermon I try to connect to a local Node but it attempts and quits
> without any message.
>
> Running CLI I get
>
> WARNING[26810]: chan_iax2.c:7844 registry_rerequest: Received unsolicited
> registry authenticate request from '192.83.199.4'
>
> When I run ifconfig I get this and I notice ?Ethernet? is in both eth0 and
> wlan0
> 192.168.xx.255 is not my gateway.
>
> eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
> inet 192.168.xx.29 netmask 255.255.255.0 broadcast 192.168.xx.255
> ether b8:27:eb:c0:20:1e txqueuelen 1000 (Ethernet)
> RX packets 5919616 bytes 301440965 (287.4 MiB)
> RX errors 0 dropped 2851 overruns 0 frame 0
> TX packets 645355 bytes 59791574 (57.0 MiB)
> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>
> lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
> inet 127.0.0.1 netmask 255.0.0.0
> loop txqueuelen 1000 (Local Loopback)
> RX packets 1190591 bytes 95612400 (91.1 MiB)
> RX errors 0 dropped 0 overruns 0 frame 0
> TX packets 1190591 bytes 95612400 (91.1 MiB)
> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>
> wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
> inet 192.168.xx.22 netmask 255.255.255.0 broadcast 192.168.xx.255
> ether 00:36:00:00:f7:d2 txqueuelen 1000 (Ethernet)
> RX packets 6391903 bytes 431486329 (411.4 MiB)
> RX errors 0 dropped 361674 overruns 0 frame 0
> TX packets 18637 bytes 1161330 (1.1 MiB)
> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>
> There must be an error in a config file but my knowledge of Linux works if
> I can do the correct search, but not managed to find the route. I know I
> can rebuild from scratch easily but sometimes I like to find the problem in
> case it occurs again.
>
> Peter Paul Fox G8HAV
> 5 Llandovery Close
> WINSFORD CW7 1NA
> Tel: +447919315547
>
> Dane Valley RAYNET
> Midcars.org
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.hamvoip.org%2Fcgi-bin%2Fmailman%2Flistinfo%2Farm-allstar&data=04%7C01%7C%7Cd0228860c4dc436b4a0008d8a2ad3408%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637438212068216453%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=ONiLoixS2eWl78vlOldj1laUzsIBVJqsgODb3bbL1F4%3D&reserved=0
>
> Visit the BBB and RPi2/3/4 web page - https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fhamvoip.org%2F&data=04%7C01%7C%7Cd0228860c4dc436b4a0008d8a2ad3408%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637438212068216453%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=RL3YXf6%2FteVGGPD0RPTJjEeUDU%2Bagqf8UxANJMvMtvQ%3D&reserved=0
>
--
Bryan
K6CBR
bryan at k6cbr.us
43918,439910
------------------------------
Subject: Digest Footer
_______________________________________________
ARM-allstar mailing list
ARM-allstar at hamvoip.org
https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.hamvoip.org%2Fcgi-bin%2Fmailman%2Flistinfo%2Farm-allstar&data=04%7C01%7C%7Cd0228860c4dc436b4a0008d8a2ad3408%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637438212068216453%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=ONiLoixS2eWl78vlOldj1laUzsIBVJqsgODb3bbL1F4%3D&reserved=0
------------------------------
End of ARM-allstar Digest, Vol 79, Issue 24
*******************************************
More information about the ARM-allstar
mailing list