[arm-allstar] New Netgate (PFsense) router

[Danny K5CG]

Fred,

For the IAX port 4569 rule make sure you set the protocol to UDP, not TCP.

I'm not sure where you are trying to connect from to reach supermon. More info needed.

Danny

----- Original Message -----
> From: "Fred Hillhouse via ARM-allstar" <arm-allstar at hamvoip.org>
> To: "ARM Allstar" <arm-allstar at hamvoip.org>
> Cc: "Fred Hillhouse" <fmhillhouse at comcast.net>
> Sent: Wednesday, December 9, 2020 11:11:41 AM
> Subject: [arm-allstar] New Netgate (PFsense) router

> Greetings,
> 
> I took an older and non-upgradable router out of service and replaced it
> with a Netgate router. It runs PFsense.
> I added Port Forward to the AllStar (Hamvoip) RPi with port 4569.
> I added Dynamic DNS Client matching my DNS alias service.
> AllStar (Hamvoip) is current.
> I assigned the node to a fixed IP.
> 
> From Supermon2, I am not able to connect to any other nodes.
> When I attempt to connect to my node, 46148, from DVSwitch, it doesn't.
> 
> Obviously I missed something!
> Any hints as to what I may have missed in my router setup or otherwise?
> Can you connect to node 46148?
> 
> I did manage to connect to another node once (using Supermon2) but no
> longer.
> 
> Thank you!
> 
> Best regards,
> Fred N7FMH
> 
> PS. There is a lesson here! Check service before changing the infrastructure
> it relies on. What I failed to do was check to make sure I could connect
> using my older router before taking it down. I had not connected from my
> phone in over a month. But, I found I missed a couple of other items too! :(
> 
> 
> --
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org