[arm-allstar] UV-82 connecting

[David H.]

I've had this happen. You need to invert the COS in the settings.

On August 11, 2020 2:03:38 PM CDT, "Chris Viningre via ARM-allstar" <arm-allstar at hamvoip.org> wrote:
>I have had this happen before. I may be wrong but I believe I had to
>change
>the COS setting.
>
>On Sun, Aug 9, 2020, 7:28 PM "Douglas Goree via ARM-allstar" <
>arm-allstar at hamvoip.org> wrote:
>
>> I have a Pofang uv82 and built a board to the schematic, connected to
>ARA
>> board from technoGoerge having trouble getting it to work. I've had
>it to
>> give callsign and IP address. When I *380 or *80 for time, I hear the
>tone
>> coming back when unkeyed. I have doubled and tripled checked the
>board and
>> sure it is right. In the usb tune I see cos keyed and ptt will key
>for a
>> second or two and go off while holding keyed. I need your help cause
>I've
>> done all I can figure out to do besides changing resistors. I'll be
>very
>> grateful for any help.
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>
>_______________________________________________
>
>ARM-allstar mailing list
>ARM-allstar at hamvoip.org
>http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>Visit the BBB and RPi2/3/4 web page - http://hamvoip.org

-- 
Sent from my LG Stylo 5 via the T-mobile network.