[arm-allstar] UV-82 connecting

[Chris Viningre]

I have had this happen before. I may be wrong but I believe I had to change
the COS setting.

On Sun, Aug 9, 2020, 7:28 PM "Douglas Goree via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I have a Pofang uv82 and built a board to the schematic, connected to ARA
> board from technoGoerge having trouble getting it to work. I've had it to
> give callsign and IP address. When I *380 or *80 for time, I hear the tone
> coming back when unkeyed. I have doubled and tripled checked the board and
> sure it is right. In the usb tune I see cos keyed and ptt will key for a
> second or two and go off while holding keyed. I need your help cause I've
> done all I can figure out to do besides changing resistors. I'll be very
> grateful for any help.
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>